-
1.
DECORATIVE COATINGS BASED ON ALUMINA PHOSPHATE BINDER, SPINEL-TYPE PIGMENT, AND WOLLASTONITE
-
(Not-set)
-
The study compares two types of coatings based on an alumina phosphate binder with a cobalt-containing spinel pigment: one without wollastonite and one with its addition. The coating without wollastonite ...
-
2.
STUDY OF THE INFLUENCE OF DIFFERENT TEMPORARY TECHNOLOGICAL BINDERS ON CERAMICS VK94-1
-
(Not-set)
-
This paper describes the process of obtaining VK94-1 ceramics with various TTB (temporary technological bonds) in order to assess the effect of the binder on properties such as apparent density, total ...
-
3.
MODIFIED AlF3 AND LiF OXYFLUORIDE LITHIUM-SILICATE SCINTILLATION GLASS FOR NEUTRON DETECTION
-
(Not-set)
-
Lithium-silicate scintillation glasses doped with rare earth ions are promising materials for neutron detectors. Oxyfluoride glasses, due to modification by fluorine, have improved spectral and mechanical ...
-
4.
TECHNOLOGY FOR PRODUCING GRANULATED FERTILIZER BASED ON PHOSPHATE FOAM GLASS
-
(Not-set)
-
This study presents aspects of developing a technology for producing granulated mineral fertilizer based on phosphate foam glass. It has been established that phosphate foam glasses, with their slow solubility ...
-
5.
POROUS STRUCTURE OF A COMPOSITE MATERIAL BASED ON CORUNDUM AND GLASS
-
(Not-set)
-
A composite material obtained by ceramic technology from electrofused corundum and finely dispersed glass is used to simulate the formation of the pore space of a porous ceramic material. According to ...
-
6.
LASER SURFACE CLEANING OF FILTERS FOR THE MANUFACTURE OF OPTICAL GLASS ELEMENTS FOR SPACECRAFT
-
(Not-set)
-
Radiation-resistant glass of the K-208 brand has been used for a long time as a protective coating for solar panels and thermoregulating coatings (TPMS) of spacecraft in the form of thin plates with a ...
-
7.
EXPERIMENTAL DETERMINATION OF THE SPECIFIC ENERGY OF DESTRUCTION OF SILICON CARBIDE-BASED CERAMICS UNDER THE INFLUENCE OF MILLISECOND LASER RADIATION
-
(Not-set)
-
Experimental studies of the effect of laser radiation with a wavelength of 1.06 ?m on reaction-sintered silicon carbide-based ceramics in the range of power densities corresponding to the mode of advanced ...
-
8.
PROSPECTS OF USING CLAYEY RAW MATERIALS OF THE STOLINSKIE KHUTORA DEPOSIT FOR PRODUCING BUILDING CERAMICS
-
(Not-set)
-
The technological properties of clay raw materials from the Stolinskiye Khutora deposit (Vidibor area, Brest region) were studied, which allowed it to classify according to GOST 9169–2021. It was found ...
-
9.
FIREСLAY CRUCIBLES WITH IMPROVED PROPERTIES FOR ORE ASSAY ANALYSIS
-
(Not-set)
-
The possibilities of obtaining fireclay crucibles for fire assay of ores with high quality indicators based on the highest-grade local raw materials of Uzbekistan – AKF-78 kaolin and fireclay obtained ...
-
10.
CURRENT STATE AND PROSPECTS OF CERAMIC MEMBRANE MARKET DEVELOPMENT (REVIEW)
-
(Not-set)
-
Using the methodology of system analysis, the paper analyzes the growth prospects of ceramic membranes, market volume and value, as well as the prevailing commercial trends in the industry by the most ...
-
11.
MECHANOCHEMICAL SYNTHESIS OF CuO/ZnO/Al2O3 OXIDE COMPOSITE FOR CATALYTIC SYSTEMS
-
(Not-set)
-
The paper investigates the process of “soft” mechanochemical synthesis of the CuO/ZnO/Al2O3 composite using copper/zinc hydroxocarbonates and aluminum oxide as feedstock. Using the methods of X-ray phase ...
-
12.
STRUCTURE AND OPTICAL PROPERTIES OF SOLID SOLUTIONS OF THE ZrO2–Sc2O3 SYSTEM OBTAINED BY CO-PRECIPITATION
-
(Not-set)
-
The structure of ZrO2–Sc2O3 powders in the composition range from 1 to 15 mol. % Sc2O3 with the addition of 0.1 mol. % Eu2O3 as a spectroscopic probe, obtained by the coprecipitation method and heat-treated ...
-
13.
GLASS-LIKE CARBON FROM SUPERCRITICAL FLUID IN THE C–O–H SYSTEM AT TEMPERATURE 800 ?C AND PRESSURE 500…1000 ATM
-
(Not-set)
-
The paper presents the results of experimental modeling of glass-like carbon synthesis from high pressure supercritical fluid in the C–O–H system at temperature 800 °C and pressure 500…1000 atm. A full ...
-
14.
FEATURES OF THE SYNTHESIS OF CERAMIC PARANIOBATE OF COMPOSITION YErYbNbO7
-
(Not-set)
-
The results of the synthesis of complex paraniobate of the composition YErYbNbO7 using various methods are presented. The chemical composition of the final synthesis products is determined. The features ...
-
15.
STUDY OF THERMAL PROCESSES IN POROUS ANODIC ALUMINUM OXIDE FILLED WITH PEROVSKITE
-
(Not-set)
-
A model has been constructed for the mathematical calculation of thermal processes occurring in hexagonally located cells in the form of articulated channels with filler. Using the proposed model, the ...
-
16.
FILTER ELEMENTS BASED ON ALUMOSILIATE FIBERS FOR SELECTIVE CATALYTIC REDUCTION OF NITROGEN OXIDES – A REVIEW
-
(Not-set)
-
A review of oxide compositions, developed for ceramic aluminosilicate fibers -based filter elements modification for the purpose of the selective catalytic reduction of nitrogen oxides in the purification ...
-
17.
EFFECT OF CRYSTALLIZATION ON LOCAL STRUCTURE AND OPTICAL PROPERTIES OF THE GLASS OF 12.5Li2O–50GeO2–37.5P2O5 COMPOSITION
-
(Not-set)
-
The glass of 12.5Li2O–50GeO2–37.5P2O5 composition was synthesized by melt quenching. By means of its thermal annealing, single-phase LiGe2(PO4)3 composition was obtained, which is promising as a solid ...
-
18.
INVESTIGATION OF THE CONDITIONS OF CERAMIC AND MECHANOCHEMICAL SYNTHESIS OF COMPOSITES CuO/ZnO/?-Al2O3
-
(Not-set)
-
In this work, using the methods of X-ray phase, X-ray diffraction, synchronous thermal analysis, scanning electron microscopy, low-temperature adsorption-desorption of nitrogen, the process of obtaining ...
-
19.
CHARACTERISTICS OF GLASSES IN PRODUCTS OF EXPERIMENTAL MODELING OF IMPACT MELTS
-
(Not-set)
-
The transformation of substances under extremely high pressures and temperatures is an actual direction both in the field of solid state physics and materials science, and for natural objects. Among the ...
-
20.
TECHNOLOGIES FOR OBTAINING FLEXIBLE THERMAL INSULATION MATERIAL
-
(Not-set)
-
The main directions of application of flexible heat insulating materials and traditional technologies for producing non-woven materials are considered. Various ways of fastening fibers are analyzed, such ...
