Radiation-resistant glass of the K-208 brand has been used for a long time as a protective coating for solar panels and thermoregulating coatings (TPMS) of spacecraft in the form of thin plates with a ...
Within the framework of the theory of developed evaporation of matter under the action of laser radiation, the problem of assessing the strength of ceramic parts of a cylindrical shape during laser punching ...
The dielectric characteristics of heat-resistant spheroplastics based on hollow ceramic microspheres and a heat-resistant binder based on aromatic polyamide - phenylone - have been investigated. The dielectric ...
Spheroplastics based on hollow ceramic microspheres and an organosilicon binder with a ladder structure capable of transition to a ceramic-like state at elevated temperatures are considered. The physical ...
The kinetics of sintering of periclase with a brucitaluminophosphate bond has been studied. To determine the kinetic parameters, a model was used that takes into account the role of physical compaction ...
A wonderful person has passed away - Eduard Pavlovich Sysoev. All labor activity of E.P. Sysoev is inextricably linked with the development and formation of the silicate industry in our country.
All his ...
The composition of the charge for facing ceramics based on low-plasticity clay with an additive containing boric acid and lithium carbonate as fluids, as well as titanium dioxide as a hardening additive ...
The composition of the charge for the production of facing ceramics based on low-plasticity clay has been developed. As additives, the mixture is introduced (mass content, & # 37;) 10 & # 37; titanium ...
The possibility of increasing the strength characteristics of ceramics by introducing a ceramic-forming polymer polydimethylsilane into the charge is considered. When polydimethylsilane is introduced into ...
Presented are the results of the development of the composition of the charge and the selection of the firing temperature for the production of glass-ceramic material in order to obtain coordinated joints ...
The possibility of increasing the dielectric characteristics of ceramics by introducing nanosized particles of pyrogenic silicon dioxide (aerosil) into the charge is considered. It is shown that the introduction ...
The results of studies of the rheological characteristics of slurry suspensions based on alumina intended for the manufacture of ceramic filters are presented. It is shown that the replacement of water ...
The results of the development of the composition of the charge for the production of ceramic bricks based on local clay of low quality with the addition of galvanic sludge from a local enterprise and ...
The research results of the Russian Chemical Technical University named after V.I. DI Mendeleev in the field of obtaining modern ceramic materials with high performance properties. The technological features ...
The results of experimental studies of the rheological properties of slips based on clay from the Msterskoye deposit of the Vladimir region, modified by breaking sheet glass and soda, are presented. Experimental ...
The indicators of long-term strength (time and deformation to failure) of dense-sintered oxide ceramics in the temperature range 1400 - 1600 ° C at loads up to 60 MPa have been determined. There is a relationship ...
Experimental data on determining the long-term strength (time and deformation to fracture) of half-sintered periclase ceramics at temperatures up to 1600 ° C at loads of 20 - 50 MPa are presented. It is ...
The results of studying the creep of polycrystalline ceramics based on metal oxides at temperatures up to 1600 ° C and high loads are presented. These temperatures are in the vicinity of the transition ...
Within the framework of a quasi-static uncoupled problem of thermoelasticity, one-sided heating of a glass or ceramic plate freely clamped along the contour by a surface source is considered. An analytical ...
The problem of manufacturing a quartz glass cell by welding with CO 2 lasers is being solved. Thermophysical analysis of the process was carried out and its mathematical model was drawn up. Welding was ...
