-
1.
Influence of pigments on the properties of the colored slips for porcelain production
-
(Science for ceramic production)
-
The effect of the introduction of different types of ceramic pigments into the slip on the change in its properties has been studied. Pigments have an emaciating effect on the slip and increase the rate ...
-
2.
Rheological characteristics of the slips in the production of heat-resistant lithium aluminum silicate ceramics
-
(Raw materials)
-
... LC) on the rheological properties and stability of the ceramic slip used to obtain heat-resistant lithium aluminum silicate ceramics. It was found that the maximum liquefaction of the ceramic suspension ...
-
3.
Effect of dilutant composition based on oxyethylidenediphosphonic acid, liquid glass and sodium carbonate on the structural and mechanical properties of clay suspensions
-
(Raw materials)
-
The effect of a complex additive based on oxyethylidene diphosphonic acid, soda and water glass on the viscosity and thixotropy of the Stephan Schmidt clay suspension was studied. Using the method of a ...
-
4.
Flow of clay suspensions used for facing tiles
-
(Science for ceramic production)
-
The effect of liquid glass with different silicate modulus on the properties of slips has been studied. It was found that with an increase in the silicate modulus, the efficiency of water glass as a diluting ...
-
5.
Temperature of Suspension as a Parameter of Control its Rheological Properties at Magnetic Separation
-
(Not-set)
-
... of impurities of ferroparticles) are their dynamic viscosity and density of the medium. The temperature dependences of the viscosity of the slip and its dispersion component (water) are compared, variants ...
-
6.
Improving Technology of Ceramic High-Porous Permeable Cellular Materials
-
(Science for ceramic production)
-
The rheological properties of corundum suspensions have been investigated. It is shown that for the preparation of corundum slip in the preparation of ceramic highly porous permeable cellular materials ...
-
7.
Additive techniques for ceramics manufacturing
-
(Science for ceramic production)
-
A review of publications devoted to additive technologies used in the production of ceramic products is presented. Methods for molding articles from sedimentation-resistant systems are described in most ...
-
8.
Influence of ultrafine SiO2 particles on quartz ceramics sintering. Product firing curve selection and concept of colloid component
-
(At the enterprises and institutes)
-
The factors influencing the sintering process of quartz ceramics are considered. The analysis of the dependence of the density of the workpieces after firing on the properties of a slip based on quartz ...
-
9.
Research in highly loaded calcium phosphate slurries for producing shaped bioceramic bodies
-
(Biomaterials)
-
The study of the rheological properties of highly concentrated calcium phosphate suspensions for the creation of bioceramics of complex shape by slip casting and 3D printing has been carried out. Macroporous ...
-
10.
Complex additives influence on
ceramic slurry consistency
-
(At the enterprises and institutes)
-
The study of the effect of a number of additives on the rheological properties of clay has been carried out. The change in the limiting dynamic shear stress and plastic viscosity as a function of the concentration ...
-
11.
Rheological behaviour of alumina slurries
-
(Science for ceramic production)
-
... used as a technological binder in slips with an aqueous solution of carbamide and aluminum oxychloride leads to an improvement in the formability of the workpieces and an increase in the mechanical characteristics ...
-
12.
Rheological behavior of porcelain slurry with bio-surfactants
-
(Science for ceramic production)
-
The effect of culture liquids with bacteria Acinetobacter johnsonii str. J221 and Pseudomonas aeruginosa str. Gd on the rheological properties of a porcelain slip. The surface activity of the culture liquid ...
-
13.
Research and development of a device for quartz sand wetting control
-
(Equipment and devices)
-
A device for determining the wettability of quartz sand has been developed. It is shown that with an increase in temperature, the surface wettability of the minerals included in the composition of glassy ...
-
14.
Microwave treatment of silicates with alumina-based dopants
-
(At the enterprises and institutes)
-
The results of treatment with a microwave field of silicates (bentonite clay and quartz sand), the effect of the field on the structure and technological characteristics of aqueous suspensions of silicates, ...
-
15.
The impact of aluminium hydrosols addition and electromagnetic field on structure and processing of clay minerals
-
(Science for ceramic production)
-
The effect of nanosized hydrosols and organoxogel of aluminum oxide on the properties of aqueous suspensions modified with nanosols of bentonite and refractory clays has been investigated. The dependence ...
-
16.
Determination of the stiffness of elastic suspension of vertical vibrating sieves and natural frequencies of the working body
-
(Equipment)
-
Calculation formulas are given for determining the stiffness of the elastic suspension of a vertical vibrating sieve taking into account the factors affecting the performance of the sieve when filtering ...
-
17.
Effect of nanodispersed hydrosol particles of silicon and aluminum oxides on the structure of clay minerals in aqueous media
-
(At the enterprises and institutes)
-
... of the structure of the ceramic material, the following were recorded: pH and structure of clay suspensions, fluidity of slips, shrinkage and compressive strength of specimens cast from slips based on ...
-
18.
Improvement of the rheological behavior of mortar slurries treated with Bacillusmucilaginosus culture broth
-
(Science for ceramic production)
-
... technological parameters of the slip and the properties of the obtained semi-finished product. This provides an expansion of the interval of the liquefied state of slips, a decrease in viscosity, thickening ...
-
19.
Complex fluxing additives for ceramic slurries
-
(Science for ceramic production)
-
The effect of complex additives SB-FF + TPFN, S-3 + TPFN, rheotan + TPFN on the mobility of ceramic slip is considered. The effect of these complexes on the physical and mechanical properties of ceramic ...
