-
1.
The Influence of Molarity and Temperature of the Alkaline Activator Solution on the Rheological Properties and Structure Formation of Alkaline Activated Refractory
Materials
-
(Not-set)
-
The effect of molarity (from 3.64 to 1.74 M) of a solution of an alkaline activator (ALA) and temperature (from 10 to 20 ° C) of a mixture of alkali-activated materials (ALA) based on chamotte and metakaolin ...
-
2.
Rheological behaviour of ceramic slurries and physic-mechanic properties of acidresistant ceramics made of nanosized petroleum chemistry and non-ferrous metals production industrial waste, and pyrophy
-
(Utilization of waste)
-
A significant effect of the amount of aluminum-containing nanotechnogenic raw materials based on non-ferrous metallurgy and pyrophyllite on the structural and rheological properties of ceramic masses for ...
-
3.
Control of structural-flow properties of ceramic masses using aqueous dispersion flood of the lubricating fluid
-
(Science for ceramic production)
-
The possibility of using water-based coolant effluents in the production of building ceramics has been determined. The influence of the spent cutting fluid on the structural-rheological (molding) properties ...
-
4.
FERROIMPURITIES OF GLASS AND CERAMIC RAW MATERIALS: NEW IN DIAGNOSTICS OF MAGNETIC PROPERTIES (FOR MAGNETIC SEPARATION TASKS)
-
(Not-set)
-
Diagnostics of magnetic susceptibility of ferroimpurities (present in the raw components of glass and ceramic products), for the removal of which magnetic separation is widely used, can be carried out ...
-
5.
INFLUENCE OF REFRACTORY FILLERS ON THE PROPERTIES OF CERAMICS BASED ON HIGH CONCENTRATED SILICA GLASS SUSPENSIONS
-
(Not-set)
-
Refractory and heat-resistant materials with a coarse-grained and large-porous structure were obtained using silica glass suspensions with mullite, spinel, corundum and quartz fillers. The influence of ...
-
6.
THE COMBINED EFFECT OF SINTERING ADDITIVES MgO AND TEOS ON THE STRUCTURE AND OPTICAL PROPERTIES OF CERAMICS YAG:Yb, Er
-
(Not-set)
-
... the introduction of a sintering additive based on MgO into a ceramic powder does not affect its phase composition, structural and morphological characteristics. It is shown that for ceramics of the composition ...
-
7.
Dielectric Properties of Finely Dispersed Kaolinite Masses of Various Degrees of Humidity
-
(Not-set)
-
The dielectric characteristics of the kaolinite mass in the frequency range from 200 to 3500 kHz are investigated. The influence of the mass humidity on the values of the real and imaginary components ...
-
8.
Porosity Structure and Technical Properties of Ceramic Materials Based on Wastes of Nonferrous Metallurgy of Eastern Kazakhstan
-
(Not-set)
-
Clinker materials were obtained from non-ferrous metal waste, where the clay part of the tailings was used as the clay material. gravity of zircon-ilmenite ores (GZI), and feldspar concentrate (PShK) - ...
-
9.
Effect of molding composition and properties on alumina block substrates characteristics
-
(Science for ceramic production)
-
Ceramic block supports were obtained by extrusion molding, varying the particle size and the conditions for obtaining corundum. The structural and mechanical properties of the molding mixtures were investigated, ...
-
10.
Rheological behaviour of borosicate glasses and melts
-
(Science for glass production)
-
The influence of concentration and structural factors on the nature of the temperature dependence of the viscosity of glasses of the systems K 2 O - B 2 O 3 - SiO 2 and Na 2 O - B 2 O 3 - ...
-
11.
Methods of measuring the flow properties of pastes for extrusion (review)
-
(Science for ceramic production)
-
... proposed to divide the research methods into structural-mechanical and rheological. The characteristics of the most informative methods, as well as structural-mechanical and rheological parameters obtained ...
-
12.
The effect of microbiological treatment on the technological properties of clays of different mineral composition
-
(Raw materials)
-
The influence of the culture of bacteria Bacillus mucilaginous on the structural-mechanical, rheological, drying and other properties of clay raw materials of various mineralogical composition was investigated. ...
-
13.
Control of the properties of molding compounds developed on the base of technical alumina
-
(Science for ceramic production)
-
... It was found that mechanochemical activation in the presence of paraffin makes it possible to achieve a greater effect in the regulation of structural, mechanical and rheological properties. The reasons ...
-
14.
CONDUCTIVE PASTES FOR LOW TEMPERATURE CO-FIRED CERAMICS – A REVIEW
-
(Not-set)
-
This article presents a review of the available scientific and technical information on conductive metallization pastes used in the production by low-temperature co-fired ceramic (LTCC) multilayer electronic ...
-
15.
GEL CASTING METHOD FOR THE PRODUCTION OF CERAMIC MATERIALS
-
(Not-set)
-
Gel casting is one of the new and promising methods for producing ceramics. Modern research on the production of ceramic materials by gel casting covers a wide range of materials, including both dense ...
-
16.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
The effect of the concentration (from 18 to 6 %) of an alkaline activator (AA) solution on the viscosity and basic properties of geopolymer composites based on chamotte with additives of foam glass production ...
-
17.
Low-Temperature Co-Firable Ceramic Li2Zn3Ti4O12 with an Eutectic Additive in the Li2O-B2O3-SiO2 System
-
(Not-set)
-
In the Li 2 O-ZnO-TiO 2 system, a material has been developed for the technology of low-temperature co-firing of ceramics with a view to its use in the production of electronic components. The sintering ...
-
18.
Obtaining Hollow Glass microspheres and Their Application in the Production of Water-Dispersion Coatings
-
(Science for glass production)
-
The results of obtaining hollow glass microspheres and their effect on the properties of facade water-dispersion paints and varnishes when replacing titanium oxide and calcium carbonate in the formulation ...
-
19.
Improving Technology of Ceramic High-Porous Permeable Cellular Materials
-
(Science for ceramic production)
-
The rheological properties of corundum suspensions have been investigated. It is shown that for the preparation of corundum slip in the preparation of ceramic highly porous permeable cellular materials ...
-
20.
Structure formation behaviour in sanitaryware slurries
-
(Science for ceramic production)
-
The features of the coagulation structure and technological properties of slip masses for casting ceramics on stands in gypsum molds and under external pressure in polymer molds are shown. The compositions ...
