-
1.
Use of Alternative Energy Sources and Glass Domestic Waste in Ceramic Facing Glazing Technology
-
(Not-set)
-
A technology for glazing ceramic tiles has been developed using alternative energy sources and glass household waste. The effect of a plasma jet on the change in the chemical composition of materials for ...
-
2.
Synthesis of synthetic minerals using alternative energy sources
-
(Science for ceramic production)
-
A technology has been developed for the synthesis of synthetic minerals (for example, spinel) using a low-temperature plasma torch. The diagnostic properties of spinel were determined. Tab. 1, bibliography: ...
-
3.
Application of alternative energy sources in technology of glass and glass ceramic materials
-
(Energy saving)
-
The results of the use of alternative energy sources in the technology of glass and glass-crystalline materials are presented. It is shown that in the process of plasma spraying of glass powders on household ...
-
4.
ENERGY- AND RESOURCE-SAVING PLASMA TECHNOLOGY FOR GLAZING OF AUTOCLAVE-HARDENED BUILDING MATERIALS
-
(Not-set)
-
An energy- and resource-saving plasma technology for glazing autoclaved building materials has been developed. It has been established that the introduction of colemanite into the initial charge makes ...
-
5.
RESOURCE- AND ENERGY-SAVING TECHNOLOGY FOR DECORATING GLASS PRODUCTS WITH FOAMING PAINTS
-
(Not-set)
-
An energy-saving technology for decorating glass products with foaming paints has been developed. The optimal parameters of coating firing by the flow of plasma–forming gas – argon are determined. The ...
-
6.
Energy-Saving Technology Decoration of Varietal Dishes By Plasma Spraying
-
(Not-set)
-
An energy-saving technology for decorating varietal dishes by plasma spraying of colored varietal and container glasses has been developed. The optimal parameters of glass powder deposition are determined. ...
-
7.
Energy-Saving Glass Ionization Technology
-
(Not-set)
-
An energy-saving technology for irisation of glass products using a high-temperature plasma torch has been developed. The effect of the effluent plasma-forming gas flow on the intensity of glass heating ...
-
8.
DEVELOPMENT OF NANOMODIFIED CEMENT USING MICROSILICA, POLYCARBOXYLATE AND DUNE SAND: OPTIMIZATION OF COMPOSITION AND STRENGTH CHARACTERISTICS
-
(Not-set)
-
This study presents the development and experimental validation of nanomodified cement obtained by joint grinding of clinker, gypsum, microsilica, polycarboxylate superplasticizer, and dune sand. The optimal ...
-
9.
GRINDING OF BIOGENIC SILICA
-
(Not-set)
-
The temperature regimes of the thermal extraction method for obtaining silicon dioxide from rice husk and various conditions of subsequent milling were investigated. Elemental, X-ray phase, petrographic ...
-
10.
FACING BUILDING MATERIAL BASED ON MECHANICALLY ACTIVATED CULLET MODIFIED WITH SODIUM HYDROXIDE
-
(Not-set)
-
The technology of facing material based on mechanically activated cullet modified with sodium hydroxides has been developed. The phase composition, macro- and microstructure of the lining material are ...
-
11.
MODERN TRENDS IN THE DEVELOPMENT OF TECHNOLOGIES FOR MATTING GLASS PRODUCTS
-
(Not-set)
-
Modern trends in the development of technologies for matting glass and glass products are considered. An effective technology of glass matting using alternative energy sources, in particular low-temperature ...
-
12.
PIEZOCERAMICS TECHNOLOGIES: APPROACHES FOR ENVIRONMENTAL IMPACT MITIGATION
-
(Not-set)
-
The functional ceramic materials are broadly used in the electronic industry. Many of them are comprised of ferroelectric materials because of their outstanding piezoelectric and dielectric properties. ...
-
13.
THE MANUFACTURING METHOD EFFECT ON THE STRUCTURE AND ELECTRICAL PROPERTIES OF SOLID SOLUTION Ce0.8Y0.2О2-?
-
(Not-set)
-
The solid solution Ce0.8Y0.2O2-? was obtained by three methods: sol gel, glycine nitrate and solid-state reaction. The synthesis temperature was 1350 ?C for the sample obtained by the sol gel method and ...
-
14.
Fly Ash as a Technogenic Raw Material for the Production of Re-fractory and Insulating Ceramic Materials (Review)
-
(Not-set)
-
A review of the literature on the production of fly ash at thermal power plants and the level of its processing in Russia and abroad is presented. The properties of fly ash and its fields of application ...
-
15.
Plasma Technologies in the Manufacture of Glass
-
(Science for glass production)
-
The possibility of using plasma technologies in glass production is considered. On the example of the synthesis of lump silicate in a plasma glass-making furnace, the features of the glass-making process ...
-
16.
Methods for producing ceramics from metal nitrides (a review)
-
(Science for ceramic production)
-
The main methods of obtaining metal nitrides are considered. The main advantages and disadvantages are highlighted for each method. The possibilities of using these materials in various industries are ...
