-
1.
GLASS-LIKE CARBON FROM SUPERCRITICAL FLUID IN THE C–O–H SYSTEM AT TEMPERATURE 800 ?C AND PRESSURE 500…1000 ATM
-
(Not-set)
-
The paper presents the results of experimental modeling of glass-like carbon synthesis from high pressure supercritical fluid in the C–O–H system at temperature 800 °C and pressure 500…1000 atm. A full ...
-
2.
PRODUCTION OF GLASS-LIKE CARBON BY HIGH-ENERGY LASER TREATMENT ON A COAL TARGET
-
(Not-set)
-
... reached. Based on the analysis of transformation products of a target substance, coal melting has been established followed by its cooling with subsequent solidification and glass-like carbon formation. ...
-
3.
CARBON FOOTPRINT OF THE LIFE CYCLE OF GLASS CONTAINER
-
(Not-set)
-
In this paper, we discuss glass containers as type of package for beverages characterized with the minimum negative environmental impact. We studied reports of independent researchers who described possible ...
-
4.
Optimizing Technological Regulation of Container Glass Manufacturing: Best Available Techniques, General Binding Rules and Carbon Intensity of Products
-
(Not-set)
-
... Russian BAT Reference Document on Glass Production and clarifying the technological parameters for resource efficiency and environmental performance of production. It is proposed to regulate the secondary ...
-
5.
Glass Composite Hardening with Multilayer Carbon Nanotubes Aligned with a Constant
Electric Field
-
(Not-set)
-
The effect of the electric field intensity and the percentage of multi-layer carbon nanotubes (MCNTs) on the strength of a composite consisting of unidirectional glass fibers has been studied. The results ...
-
6.
Mechanical Properties of Glass-Fiber Plastics Modified with Carbon Nanotubes
-
(Science for glass production)
-
The results of a study of the physical and mechanical characteristics of fiberglass modified with carbon nanotubes are presented. An epoxy binder was chosen as a polymer matrix; glass fibers were used ...
-
7.
Carbon nanomaterials and SnO2 based conductive coatings on glasses for photoconverters
-
(Coatings)
-
Electrically conductive coatings for photovoltaic cells containing carbon nanotubes and other carbon nanostructures and SnO 2 have been obtained. The surface of the coating samples at all stages of synthesis ...
-
8.
Effect of dilutant composition based on oxyethylidenediphosphonic acid, liquid glass and sodium carbonate on the structural and mechanical properties of clay suspensions
-
(Raw materials)
-
The effect of a complex additive based on oxyethylidene diphosphonic acid, soda and water glass on the viscosity and thixotropy of the Stephan Schmidt clay suspension was studied. Using the method of a ...
-
9.
POROUS STRUCTURE OF A COMPOSITE MATERIAL BASED ON CORUNDUM AND GLASS
-
(Not-set)
-
A composite material obtained by ceramic technology from electrofused corundum and finely dispersed glass is used to simulate the formation of the pore space of a porous ceramic material. According to ...
-
10.
LASER THERMAL SEALING OF NANOPOROUS GLASSES
-
(Not-set)
-
The processes of thermal consolidation of nanoporous glass surface by means of carbon dioxide laser radiation have been investigated. Successful formation of a heat-sealed layer with a thickness of (20 ...
-
11.
ENGINEERING OF THE AUTOMATED CONTROL SYSTEM OF THE GLASS FORMING MACHINE TECHNOLOGICAL PROCESS AS A TOOL FOR FORMING THE SECTORAL TECHNOLOGICAL SOVEREIGNTY
-
(Not-set)
-
A methodological approach to developing hardware and software solutions for debugging and testing algorithms and control systems for actuators of a glass-forming machine in real time is presented. During ...
-
12.
PREPARATION OF A COMPOSITE BASED ON HOLLOW GLASS MICROSPHERES MODIFIED WITH SILVER NANOPARTICLES
-
(Not-set)
-
Composite materials based on K 25 hollow glass microspheres were obtained by modifying them with silver nanoparticles obtained by an environmentally friendly “green” method using an aqueous plant extract ...
-
13.
INFLUENCE OF TECHNOLOGICAL FACTORS ON MECHANICAL STRENGTH OF PERICLASE-CARBON REFRACTORIES
-
(Not-set)
-
The paper presents the results of research on the influence of humidity, heat treatment temperature, fractional composition of periclase, time of aging before heat treatment, the amount of carbon in the ...
-
14.
THERMODYNAMIC ANALYSIS OF OXIDE-CARBON AND CARBON MONOXIDE CHEMICAL REACTIONS IN ORDER TO SELECT ADDITIVES FOR CARBON NANOTUBE REINFORCED CORUNDUM CERAMICS
-
(Not-set)
-
The calculation of Gibbs energy for reactions of interaction of ZrO2, Al2O3, SiO2, TiO2, CaO and MnO with carbon and carbon monoxide in temperature range 1273 – 2273 К (1000 – 2000 ?С) is made to select ...
-
15.
APPLICATION OF THERMAL PLASMA ENERGY FOR PRODUCING GLASS-CRYSTALLINE MATERIALS
-
(Not-set)
-
The characteristics of glass-ceramic materials obtained using thermal plasma have been studied. The effect of TPP ash on the properties of glass-ceramic materials should be taken into account. Samples ...
-
16.
CHARACTERISTICS OF GLASSES IN PRODUCTS OF EXPERIMENTAL MODELING OF IMPACT MELTS
-
(Not-set)
-
... latter, the most interesting are ultrahigh-pressure high-temperature glasses recently found at the Kara giant meteorite crater (Pai-Khoi, Russia), formed from impact melts at pressure about 60 – 80 GPa ...
-
17.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
The effect of the concentration (from 18 to 6 %) of an alkaline activator (AA) solution on the viscosity and basic properties of geopolymer composites based on chamotte with additives of foam glass production ...
-
18.
INFLUENCE OF LIQUID FOAMING AGENT DISTRIBUTION ON THE FORMATION OF FOAM GLASS POROUS STRUCTURE
-
(Not-set)
-
It was shown that the use of liquid-phase foaming agents is promising for the synthesis of foam glass. The dynamics of the change in the glass particles size in the process of batch obtaining was studied. ...
-
19.
SUBSTRATES FOR THE SURFACE ENHANCED RAMAN SPECTROSCOPY BASED ON NANOPOROUS GLASS ACTIVATED WITH SILVER PARTICLES
-
(Not-set)
-
... of substrates manufacturing often limits their applications. In this work, we proposed a simple method for preparing SERS substrates based on the nanoporous glass functionalized with silver particles and ...
-
20.
Insulating Enamel Leaden-Borate Glass Basis
-
(Not-set)
-
... one. At the same time, thermal coefficient of linear expansion values level must be the same as the metal. The highest values of dielectric properties are characteristic of low-alkali and alkali-free glasses ...
