Steklo i Keramika (Glass and Ceramics). Monthly scientific, technical and industrial journal

 

ISSN 0131-9582 (Online)

Total: 50 results found.

Page 1 of 3

1. PHYSICO-MECHANICAL PROPERTIES OF BORON COATINGS DEPOSITED IN AN ATMOSPHERE OF VARIOUS GASES BY AN ELECTRON BEAM IN A FOREVACUUM
(Not-set)
... pressure range. The physicomechanical properties of coatings formed when inert, active, and reactive gases are injected into the region of interaction between an electron beam and a target are investigated. ...
2. PHYSICAL AND MECHANICAL PROPERTIES OF Al-Al2O3 CERMET WITH A HETEROGENEOUS GRANULE-LAYERED STRUCTURE PRODUCED USING MECHANICAL ALLOYING AND VACUUM SINTERING
(Not-set)
... agglomerates in a planetary ball mill in the mechanical alloying mode was carried out. The resulting charge, consisting of layered granules containing alternating alumina and aluminum layers, was compacted ...
3. EFFECT OF THE THERMOCHEMICAL STRENGTHENING OF ALUMINOSILICATE GLASS ON THEIR OPTICAL AND MECHANICAL PROPERTIES
(Not-set)
The processes of thermochemical hardening of aluminosilicate glass are investigated. The glass was processed in a KNO3 melt under industrial and laboratory conditions at 440…480 °C for 1…120 h. The effect ...
4. INFLUENCE OF NANODISPERSED ALUMINUM OXIDE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF TECHNICAL CERAMICS
(Not-set)
The article presents the results of a study on the development of a composition of technical ceramics for ceramic grinding bodies and the influence of dispersed oxide on its basic properties. It is shown ...
5. PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC COMPOSITE MATERIAL BASED ON Al6Si2O13–ZrSiO4
(Not-set)
Composite ceramic materials based on SiO2–Al2O3–ZrO2 nanopowders were obtained by sintering and their properties were studied. Before sintering, the powders were subjected to mechanical activation in a ...
6. IMPROVEMENT OF THE PHYSICO-MECHANICAL PROPERTIES OF FACING BRICKS THROUGH HYPERPRESSING BASED ON LOCAL RAW MATERIALS
(Not-set)
This work examines the main regularities in the formation of cement stone structure and the relationship between the properties of concrete mixes with various fillers and highly compressed materials obtained ...
7. PHYSICAL AND MECHANICAL PROPERTIES OF CERAMIC TILE IN THE COMPOSITION CLAY–DUNE SAND
(Not-set)
The article investigates the physical, mechanical and technological properties of ceramic plates in the composition of Kulatau clay and dune sands of the Tuprakkala massif located in the lower amudarya ...
8. EFFECTS OF BINARY OXIDE COATED MWCNTS TOWARD TAILORING THE MECHANICAL, THERMO-MECHANICAL, AND MICROSTRUCTURAL PROPERTIES OF PRESSURELESS SINTERED MgAl2O4 SPINEL CERAMIC COMPOSITE
(Not-set)
This study presents a performance evaluation of MgAl-binary oxide-coated multi-walled carbon nanotubes (MWCNTs) as a reinforcement phase in a magnesium aluminate spinel MgAl2O4 ceramic composite system ...
9. PREDICTIVE MODELING OF THE MECHANICAL PROPERTIES OF ALPHA ALUMINA USING ARTIFICIAL NEURAL NETWORKS AND MULTIPLE LINEAR REGRESSION
(Not-set)
In the present study, we built predictive models of the mechanical properties (Young's modulus, fracture strength and toughness) of ?-Al2O3. Experiments carried out on samples produced by spark plasma sintering ...
10. STUDY OF THE STRUCTURAL AND MECHANICAL PROPERTIES OF SAMPLES BASED ON MAGNESIUM OXIDE FORMED IN THE PROCESS OF POLYMERIZATION OF ORGANIC BINDER
(Not-set)
... in dry form at a temperature of 300 ?C. The obtained results suggest that the increase in the structural and mechanical properties of products based on magnesium oxide will be facilitated by the moistening ...
11. MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF OPAQUE CERAMIC TILES GLAZED WITH SOME INDUSTRIAL WASTES
(Not-set)
The primary goal of this research is to determine the mechanical properties of opaque glazed ceramic tiles containing fly ash, tincal waste, and recycled red clay, including to assess if the results meet ...
12. Physico-Mechanical and Electrophysical Properties of Porous Glass Composites with Silicon Carbide Additives
(Not-set)
The influence of silicon carbide (10 & # 8211; 40 & # 37; by mass) on the physical-mechanical and electro-physical characteristics of composites is considered. The effect of the additive on the radio absorption ...
13. The Phase Composition and Physico-Mechanical Properties at Different Temperatures of Ceramic Firing Earthquake-Resistant Bricks Using Ferroli
(Not-set)
... A further increase in the firing temperature to 1100 ° C leads to an increase in the content of anorthite, diopside and cristobalite. Physicomechanical parameters increase due to the formation of anorthite ...
14. Complex Method of Investigation of Physical and Mechanical Properties of Ceramic Compositions of the Grain - Ceramic Binder - Pores System Using Nonparametric Regression Analysis
(Not-set)
The substantiation and development of a methodology for a comprehensive study of the physical and mechanical properties of ceramic compositions of the system grain - ceramic binder - pores using nonparametric ...
15. Mechanical Properties of Glass-Fiber Plastics Modified with Carbon Nanotubes
(Science for glass production)
The results of a study of the physical and mechanical characteristics of fiberglass modified with carbon nanotubes are presented. An epoxy binder was chosen as a polymer matrix; glass fibers were used ...
16. Physical and mechanical properties of light-curing composite materials
(Biomaterials)
... indicated. The composition of the developed material is presented, as well as some technological aspects of its production. The study of the physical and mechanical properties of the developed composite ...
17. Effect of dilutant composition based on oxyethylidenediphosphonic acid, liquid glass and sodium carbonate on the structural and mechanical properties of clay suspensions
(Raw materials)
... full factorial experiment, regression equations are obtained that describe the dependences of the structural and mechanical characteristics of the suspension on the composition and amount of the complex ...
18. Physicomechanical properties of fibers from volcanic slags and materials on their base
(Science for glass production)
The physicomechanical properties of mineral fibers made from volcanic slags from two deposits in Armenia have been studied. It is shown that slag fibers can become an alternative to widely used glass fibers. ...
19. Physicomechanical properties of andesite-dacite fibers and their modifications
(Science for glass production)
The properties of mineral fibers from andesitodacite, which are erupted volcanic rocks, have been studied. The elastic-strength characteristics of elementary fibers, filaments, as well as microplastics ...
20. Physicomechanical properties of aspirated dust in production of ceramic pigments
(Environmental protection)
The conditions of formation and physical and mechanical properties of dust emissions, formed in the production of ceramic pigments, have been investigated. Practical recommendations are given. Tab. 1, ...