-
1.
Systematic approach to secondary products implementation in glass-making
-
(Environmental protection. Utilization of waste)
-
The technological features of the use of secondary products in the technology of silicate materials are considered; the main problems that must be taken into account when using secondary products and substandard ...
-
2.
Optimizing Technological Regulation of Container Glass Manufacturing: Best Available Techniques, General Binding Rules and Carbon Intensity of Products
-
(Not-set)
-
... Russian BAT Reference Document on Glass Production and clarifying the technological parameters for resource efficiency and environmental performance of production. It is proposed to regulate the secondary ...
-
3.
The Quality Improvement of Construction Products Based on Technogenic Crushed Glass
-
(Utilization of waste)
-
The size of the fraction of ground glass as the main component has a decisive influence on the quality of building products made of foam glass concrete. This indicates the need to ensure a given size of ...
-
4.
ANTI-FILTRATION AND SORPTION CHARACTERISTICS OF OVERBURDEN ROCKS FOR RAW MATERIAL EXTRACTION FOR THE CEMENT INDUSTRY
-
(Not-set)
-
The article presents the results of determining the anti-filtration and sorption capacity of palygorskite and other clays of the Borshchevsky and Voskresensky cement raw material deposits, which are overburden ...
-
5.
INVESTIGATION OF THE INFLUENCE OF YTTERBIUM OXIDE ON PHASE COMPOSITION AND SHS PARAMETERS OF COMPOSITIONS BASED ON SILICON NITRIDE
-
(Not-set)
-
... and the phase composition of the synthesis products. With an increase in the proportion of ytterbium oxide in the mixture, the content of the alpha phase decreases, and the secondary phases are represented ...
-
6.
ELECTROTECHNICAL PORCELAIN BASED ON RAW MATERIALS OF UZBEKISTAN
-
(Not-set)
-
... at 1350 ?С of primary and secondary Angren kaolins allow us to consider them as a mullite-containing component, which further provides high physical, mechanical and dielectric properties of the porcelain ...
-
7.
JOINT PROCESSING OF QUARTZ-LEUCOXENE CONCENTRATE AND BRUCITE CONTAINING WASTE FROM THE PRODUCTION OF REFRACTORY MATERIALS TO OBTAIN COMPLEX COAGULANTS
-
(Not-set)
-
The volumes of large-tonnage mineral waste generation cause serious concern from the side of environmental supervision. Most of the mineral waste is a valuable secondary raw material, but the lack of integrated ...
-
8.
RESEARCH OF THE UNIFORMITY OF THE COMPOSITION OF A CERAMIC PRODUCT DURING IMPREGNATION WITH A BINDER
-
(Not-set)
-
... of the mechanical properties of the products. The paper presents the results of research and development of methods for regulating the uniformity of impregnation of ceramic samples with a secondary bi ...
-
9.
Ecogeopolymers Based on Ash Waste CHPP – Prospective Materials for Road Construction in the Arctic Zone
-
(Not-set)
-
In the course of the study, the possibility of using ash and slag waste from the thermal power plant of the Arctic zone as raw materials for the production of porous ecogeopolymers was studied. The assessment ...
-
10.
Plasma Technology for the Production of Glass
Pellets Based on Waste from the Enrichment of Ferruginous Quartzite KMA
-
(Not-set)
-
A technology has been developed for producing glass microspheres in a plasma reactor based on the wastes of enrichment of ferruginous quartzites KMA. The regularities of the influence of the flow rate ...
-
11.
Bulk Processing of Industrial Waste into Foam Glass Materials
-
(Not-set)
-
An overview of research in the field of utilization of large-scale industrial waste in the production of granular and block foam materials is presented. The possibilities and prospects of obtaining materials ...
-
12.
Pilot Testing of Heat-Resistant Citall Coating for High-Temperature Corrosion Protection of Nichrome Alloys
-
(Coatings)
-
... The results of the economic efficiency of the application of the developed heat-resistant sitall coatings with the use of secondary raw materials during the operation of coatings at high temperatures are ...
-
13.
Identification of ?Black Dots? in Glass
-
(Science for glass production)
-
Considered two types of glass blemish & # 171; black dots & # 187; - chromite and silicon. Methods for establishing their nature and the most probable reasons for their appearance are presented.
-
14.
Interaction of Alkaline Medium of Concrete with Foam Ceramics
-
(At the enterprises and institutes)
-
The activity of foamed ceramics and foam glass to silicate-alkaline interaction in concrete has been investigated. It was found that in a humid concrete environment, vitrified walls of the pores of the ...
-
15.
Protection of Nichrome alloys articles from high-temperature cor-rosion (review)
-
(Coatings)
-
The results of the analysis of research in the field of developing compositions and methods of applying high-temperature coatings for the protection of various metals and alloys are presented. The relevance ...
-
16.
Composite heat-insulation material synthesis from liquid glass and salt industrial waste of aluminium production
-
(Utilization of waste)
-
On the basis of liquid glass modified with sodium chloride and salt waste of aluminum production, a heat-insulating material was obtained without the use of natural traditional materials. The presence ...
-
17.
Studies in polyfunctional composite silicate materials prosessing. Education and training for construction matrials industry
-
(Science for glass and ceramic production)
-
To the 110th anniversary of the South Russian State Polytechnic University (NPI) named after M.I. Platova. The history of education, the types of activities of the department? General chemistry and technology ...
-
18.
Remedial works in fused glass artware production
-
(At the enterprises and institutes)
-
Possible defects and inconsistencies with the requirements of artistic and industrial glass products during fusing are considered, methods for eliminating defects and ways of restoring rejected products ...
-
19.
Using of the glass cut in the manufacture of building materials
-
(Utilization of waste)
-
The issues of the formation of glass breakage both in the form of solid household waste and at the industrial processing of flat glass are considered. The prospect of using cullet in the manufacture of ...
-
20.
Refining of the kiln furniture for ceramic firing
-
(At the enterprises and institutes)
-
A technical solution is presented that increases the efficiency of using racks of multi-tier trolleys for firing ceramics. The rack has a horizontal shelf in the form of a quarter of a square or disc and ...
