Experimental samples of ceramic composite materials in the SiC-ZrB 2 system with additions of graphite and aluminum nitride were obtained by the method of spark plasma sintering. The physical and mechanical properties of composites (density, bending strength, hardness, crack resistance) were investigated depending on the temperature parameters of their preparation. The microstructure of the materials has been studied and micro-X-ray spectral analysis has been carried out, the oxidation resistance of the obtained samples has been determined at a temperature of 1500 ° C.
Kablov E. N. Innovative developments of FSUE? VIAM? SSC RF for the implementation of? Strategic directions for the development of materials and technologies for their processing for the period up to 2030? // Aviation materials and technologies. 2015.? 1.S. 3? 33. DOI: 10.18577 / 2071-9140-2015-0-1-3-33
Kablov E. N., Grashchenkov D. V., Isaeva N. V. et al. High-temperature structural composite materials based on glass and ceramics for promising products of aviation technology // Glass and ceramics. 2012.? 4.S. 7? 11.
? Kablov EN, Grashchenkov DV, Isaeva NV et al. Glass and ceramics based high-temperature composite materials for use in aviation technology // Glass and Ceram. 2012. V. 69. N 3? 4.P. 109? 112.?
Kablov E.N., Grashchenkov D.V., Isaeva N.V., Solntsev S. Art. Promising high-temperature ceramic composite materials // Russian Chemical Journal. 2010. T. LIV. ? 1.S. 20? 24).
Chainikova AS, Orlova LA, Popovich NV et al. Functional composites based on glass / glass-crystalline matrices and discrete fillers: properties and applications // Aviation materials and technologies. 2014.? S6. S. 52? 58. DOI: 10.18577 / 2071-9140-2014-0-s6-52-58 Chainikova
A. S., Orlova L. A., Popovich N. V. et al. Dispersion-strengthened composites based on glass / glass-crystalline matrices: properties and applications (review) // Aviation materials and technologies. 2014.? 3.S. 45? 54. DOI: 10.18577 / 2071-9140-2014-0-3-45-54
Sorokin O. Yu., Grashchenkov D.V., Solntsev S.St. , Evdokimov S.A. promising aircraft // Tr. VIAM: electron. scientific and technical zhurn. 2014.? 6. Art. 08. URL: http://www.viam-works.ru. DOI: dx.doi.org/10.18577/2307-6046-2014-0-6-8-8.
Grashchenkov DV, Sorokin OY, Lebedeva YE, Vaganova ML Specific features of sintering of HfB2-based refractory ceramic by hybrid spark plasma sintering // Russian Journal of applied chemistry. 2015. V. 88. N 3.P. 386? 393.
Lebedeva, Yu. E., Grashchenkov, DV, Popovich, NV, et al. Development and study of thermostable coatings obtained by the sol-gel method in the Y2O3? Al2O3? SiO2 system for SiC-containing materials, Tr. VIAM: electron. scientific and technical magazine. 2013.? 12.Art. 03 URL: http://www.viam-works.ru.
Pat. US 5990025 A. Ceramic matrix composite and method of manufacturing the same; publ. 1999.
Noviyanto A., Dang-Hyok Y., Young-Hwan H. of SiCf / SiC hybrid composites fabricated by hot pressing and spark plasma sintering // Advances in Applied Ceramics. V. 110. N 7. 2011. P. 375? 382. DOI: 10.1179 / 1743676111Y.0000000025.
Pat. US 6291058 B1 Composite material with ceramic matrix and SiC fiber reinforcement, method for making same; publ. 2001
Pat. US 20110200748. A1Method for producing parts made of a thermostructural composite material; publ. 2001.
Krenkel W., Berndt F. C / C-SiC composites for space applications and advanced friction systems // Materials Science and Engineering A. 2005. V. 412. N 1? 2.P. 177? 181. DOI: 10.1016 / j.msea. 2005.08.204.
Jacobson NS Corrosion of silicon-based ceramics in combustion environments // J. Eur. Ceram. Soc. 1993. V. 76. P. 3? 28.
Shaoming D. Preparation of SiC / SiC composites by hot pressing, using Tyranno-SA fiber as reinforcement // J. Am. Ceram. Soc. 2003. V. 86. N 1.P. 26? 32.
Corman G., Upadhyay R., Sinha S. et al. General Electric company: selected applications of ceramics and composite materials // Materials Research for Manufacturing. 2016. P. 59? 91. DOI: 10.1007 / 978-3-319-23419-9_3.
Corman G. Melt infiltrated composites (HIPERCOMP) for gas turbine engine applications // GE Global Research High Temperature and Structural Ceramics Laboratory Niskayuna. NY, 2006. DOI: 10.2172 / 936318.
Corman G. Melt infiltrated ceramic matrix composites for shrouds and combustor liners of advanced industrial gas turbines. Final Report. // GE Global Research Advanced Ceramics Laboratory Niskayuna, 2010. DOI: 10.2172 / 1004879.
Karimbaev T. D., Mezentsev M. A., Yezhov A. Yu. Development and experimental research of non-metallic parts and assemblies of the hot part of a promising gas turbine engine // Bulletin of the Samara State Aerospace University. 2015.Vol. 14.? 3. Part 1.P. 128? 138.
Simonenko EP, Simonenko NP, Derbenev AV, Nikolaev VA Synthesis of nanocrystalline silicon carbide using the sol-gel method // Journal of Inorganic Chemistry. 2013.Vol. 58.? 13.S. 1279? 1288. DOI: 10.7868 / S0044457X1310022X.
Naslain RR Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview // Composites Science and Technology. 2004. V. 64. P. 155? 170.
Simonenko EP, Simonenko NP, Sevast'yanov VG et al. Functionally gradient composite material SiC / (ZrO2? HfO2? Y2O3) obtained using the sol-gel method // Composites and nanostructures. 2011.? 4.S. 52? 64.
Naslain RR Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview // Composites Science and Technology. 2004. V. 64. P. 155? 170. DOI: 10.1016 / S0266-3538 (03) 00230-6.
Sorokin O. Yu., Solntsev S. St., Evdokimov S. A., Osin I. V. Method of hybrid spark plasma sintering: principle, possibilities, application prospects // Aviation materials and technologies. 2014.? S6. S. 11? 16. DOI: 10.18577 / 2071-9140-2014-0-s6-11-16.
Boldin M. S., Sakharov N. V., Shotin S. V. et al. Composite ceramics based on aluminum oxide obtained by electro-pulse plasma sintering for tribological applications // Bulletin of Nizhny Novgorod University. N.I. Lobachevsky. 2012.? 6 (1). S. 32? 37.
Chuvildeev VN, Boldin MS, Dyatlova Ya. G. et al. Comparative study of hot pressing and high-speed electro-pulse plasma sintering of Al2O3 / ZrO2 / Ti (C, N) powders // Journal of Inorganic Chemistry. 2015.Vol. 60.? 8, p. 1088. DOI: 10.7868 / S0044457X1508005X.
Naslain R., Design R. Preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview // Composites Science and Technology. 2004. V. 64. P. 155? 170.
Chuvildeev VN, Boldin MS, Dyatlova Ya. G. et al. Comparative study of hot pressing and spark plasma sintering of Al2O3? ZrO2? Ti (C, N) powders // Journal of Inorganic Chemistry. 2015.Vol. 51.? 10.S. 1128.DOI: 10.7868 / S0002337X15090031.
Kablov E.N. Strategic directions for the development of materials and technologies for their processing for the period up to 2030 // Aviation materials and technologies. 2012.? S. S. 7? 17.
The article can be purchased
electronic!
PDF format
700 руб
UDK 677.523
Article type:
Science for ceramic production
Make a request
