Steklo i Keramika (Glass and Ceramics). Monthly scientific, technical and industrial journal

 

ISSN 0131-9582 (Online)

  • Continuous numbering: 1093
  • Pages: 31-36
  • Share:

Heading: At the enterprises and institutes

An alumina-graphite composite was obtained by the method of spark-plasma sintering. The influence of the size of graphite particles, the compaction temperature and the holding time on the formation of aluminum carbide is revealed. It is shown that the use of larger graphite plates reduces the formation of Al 4 C 3 by almost 2 times. The influence of the graphite content on the density, thermal expansion coefficient and thermal conductivity of the composite is considered. It was found that with a mass content of graphite above 70 & # 37; thermophysical properties of compacts significantly deteriorate due to the formation of a large number of pores
Miracle D. Metal matrix composites? From science to technological significance // Compos. Sci. Technol. 2005. V. 65. P. 2526. Tjong SC Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets // Mater. Sci. Eng. 2013. R 74. P. 281. Bhav Singh B., Balasubramanian M. Processing and properties of copper-coated carbon fiber reinforced aluminum alloy composites // J. Mater. Process. Technol. 2009. V. 209. P. 2104. Liu TT, He XB, Liu Q. et al. Fabrication and thermal conductivity of short graphite fiber / Al composites by vacuum pressure infiltration // J. Mater. Eng. Perform. 2013. V. 22. P. 1649. Ouyang H., Li H., Qi L. et al. Fabrication of short carbon fiber preforms coated with pyrocarbon / SiC for liquid metal infiltration // J. Mater. Sci. 2008. V. 43. P. 4618. Ting JM, Lake ML Vapor-grown carbon-fiber reinforced carbon composites // J. Mater. Res. 1995. V. 10. P. 247. Cai J., Chen Y., Nesterenko VF, Meyers MA Effect of Strain Rate on the Mechanical Properties of Aluminum Alloy Matrix Composite Filled with Discontinuous Carbon Fibers // Mater. Sci. Eng. A. 2008. V. 485. P. 681. Chawla KK, Chawla N. Metal Matrix Composites. Hoboken: Wiley, 2006. Chiou JM, Wei BY, Chen CM The effects of binders and heating temperatures on the properties of preforms // J. Materi. Eng. Perform. 1993. V. 2. P. 383. Jacquesson M., Girard A., Vidal-Setiif MH, Valle R. Fatigue behavior of aluminum matrix composites reinforced with continuous alumina fibers // Metall. Mater. Trans. A. 2004. V. 35. P. 3289. Monje IE, Louis E., Molina JM Optimizing thermal conductivity in gas-pressure infiltrated aluminum / diamond composites by precise processing control // Composites. A. 2013. V. 48. No. 9. Liu YH, Du J., Yu SR, Wang W. Creating defects on graphene basal-plane toward interface optimization of graphene / CuCr composites // Wear. 2004. V. 256. P. 275. Tan Z., Li Z., Fan G. et al. Diamond / aluminum composites processed by vacuum hot pressing: Microstructure characteristics and thermal properties // Diam. Relat. Mater. 2013. V. 31. No. 1. Mizuuchi K., Inoue K., Agari Y. et al. Processing of diamond particle dispersed aluminum matrix composites in continuous solid? Liquid co-existent state by SPS and their thermal properties // Composites. B. 2011. V. 42. P. 825. Landry K., Kalogeropoulou S., Eustathopoulos N. Wettability of carbon by aluminum and aluminum alloys // Mater. Sci. Eng. A. 1998. V. 254. P. 99. Tan Z., Li Z., Fan G. et al. Fabrication of diamond / aluminum composites by vacuum hot pressing: Process optimization and thermal properties // Composites. B. 2013. V. 47. P. 173. Chu K., Jia C., Liang X. et al. Effect of particle size on the microstructure and thermal conductivity of Al / diamond composites prepared by spark plasma sintering // Rare Met. 2009. V. 28. P. 646. Etter T., Schulz P., Weber M. et al. Aluminum carbide formation in interpenetrating graphite / aluminum composites // Mater Sci Eng. A. 2007. V. 448. No. 1 ? 2.P. 1? 6. Revzin B., Fuks D., Pelleg J. Influence of alloying on the solubility of carbon fibers in aluminum-based composites: non-empirical approach // Composites. Sci. Technol. 1996. V. 56. P. 3? 10. Mizuuchi K., Inoue K., Agari Y. et al. Processing of diamond particle dispersed aluminum matrix composites in continuous solid? Liquid co-existent state by SPS and their thermal properties // Composites. B. Eng. 2011. V. 42. No. 4. P. 825? 831. Chen JK, Huang IS Thermal properties of aluminum? Graphite composites by powder metallurgy // Composites. B. Eng. 2012. V. 42. No. 2.P. 790? 825. Hiroki Kurita, Silvain J.-F., Akira Kawasaki. Microstructure of a carbon fiber-reinforced aluminum matrix composite fabricated by spark plasma sintering in various pulse conditions // Journal of Materials Science. 2014. V. 49. No. 8.P. 3268? 3275. Lumley RN, Sercombe TB, Schaffer GB Surface oxide and the role of magnesium during the sintering of aluminum // Metall Mater Trans. A. 1999. V. 30A. P. 457? 463. Turner PS Thermal-expansion stresses in reinforced plastics, J. Res. NBS. 1946. V. 37. P. 239? 250. Kerner EH The Elastic and Thermo-elastic Properties of Composite Media // Proc. Phys. Soc. B. 1956. V. 69. P. 808? 813. Khor KA, Yu LG, Andersen O., Stephani G. Effect of spark plasma sintering (SPS) on the microstructure and mechanical properties of randomly packed hollow sphere (RHS) cell wall // Mater. Sci. Eng. A. 2003. V. 356. P. 130? 135. Anselmi-Tamburini U., Gennari S., Garay JE, Munir ZA Fundamental investigations on the spark plasma sintering / syn-thesis process. II. Modeling of current and temperature distributions // Mater. Sci. Eng. A. 2005. V. 394. P. 139? 148. Kurita H., Kwon H., Estili M, Kawasaki A. Multi-walled carbon nanotube-aluminum matrix composites prepared by combination of hetero-agglomeration method, spark plasma sintering and hot extrusion // Mater. Trans. 2011. V. 52. No. 10.P. 1960? 1965. Lalet G., Kurita H., Heintz J.-M. et al. Thermal expansion coefficient and thermal fatigue of discontinuous carbon fiber-reinforced copper and aluminum matrix composites without interfacial chemical bond // J. Mater. Sci. 2014. V. 49. P. 397? 402. doi: 10.1007 / s10853-013-7717-7. Eriksson M., Shen Z., Nygren M. Fast densification and deformation of titanium powder // Powder Metall. 2005. V. 48. P. 231? 236. Chang CJ, Chang CH, Hwang JD, Kuo CT Thermal characterization of high thermal conductive graphites reinforced aluminum matrix composites // Proceedings of IMPACT conference 2009 international 3D IC conference. Taipei, Taiwan, October, 2009. Taipei, 2009. Baglari S., Kole M., Dey TK Effective thermal conductivity and coefficient of linear thermal expansion of high-density polyethylene-fly ash composites // Ind. J. Phys. 2011. V. 85. No. 4. P. 559? 73.

The article can be purchased
electronic!

PDF format

700 руб

UDK 666.3.032.62
Article type: At the enterprises and institutes
Make a request

Keywords

Use the reference below to cite the publication

Rubinkovskiy N. A., Shornikov D. P., Tenishev A. V., Zaluzhnyy A. G., Zholnin A. G. Production of aluminum-graphite composite by spark-plasma sintering. Steklo i keramika. 2019:92(1):31-36. (in Russ). UDK 666.3.032.62