The possibility of using pyrolysis products of oil-containing waste, including oil sludge, in the synthesis of porous ceramics is shown. High carbon content in pyrolysis products of oil sludge determines the expediency of their application as a burnout component for partial replacement of raw material in the production of aluminosilicate ceramics. The presence of metal oxides of natural and anthropogenic origin in pyrolysis products of oil sludge contributes to the reduction of firing temperature in comparison with clay samples without additives from 1150 to 1080 ?С. It is advisable to introduce pyrolysis products of oil-containing waste in the raw material mixture in the amount of up to 20 %.
Elena V. Kalinina – PhD in Technical Sciences, Associate Professor of the Environmental Protection Department, Perm National Research Polytechnical University, Perm, Russia
Vitaly A. Shamanov – Ph.D. in Technical Sciences, Associate Professor of the Department of Construction Engineering and Materials Science, Perm National Research Polytechnical University, Perm, Russia
Marina P. Krasnovskikh – Ph.D. in Technical Sciences, Associate Professor of the Department of Inorganic Chemistry, Chemical Technology and Technosphere Safety, Perm State National Research University, Perm, Russia
Aleksandr A. Ketov – Dr. Eng., Professor, Professor of Environmental Protection Department, Perm National Research Polytechnical University, Perm, Russia
Ksenia A. Volosatova – senior lecturer of the Department of Construction Engineering and Materials Science, Perm National Research Polytechnical University, Perm, Russia
1. Abdrakhimova E. S., Abdrakhimov V. Z. Chemical, phase compositions and porosity structure of the plinth brick of the white tower (greece) of age greater than 450 Yr // Glass and Ceramics. 2019. V. 76. P. 152 – 154. DOI: 10.1007/s10717-019-00153-y
2. Rumi M. Kh., Nurmatov Sh. R., Irmatova Sh. K., et al. Effect of the type of carbon-containing burnable additive on the properties of lightweight aluminum-silicate thermal insulation // Glass and Ceramics. 2021. V. 78, No. 5–6. Р. 200 – 203. DOI: 10.1007/s10717-021-00378-w
3. Moshnyakov M. G., Abdrakhimov V. Z. Investigations of the black core and swelling in firing porcelain stoneware // Glass and Ceramics. 2019. V. 76. P. 270 – 273. DOI: 10.1007/s10717-019-00181-8
4. Явруян Х. С., Гайшун Е. С., Мирина В. А. Инновационные добавки при производстве стеновой керамики // Инженерный вестник Дона. 2016. № 4. URL: http://ivdon.ru/ru/magazine/archive/n4y2016/3763
5. Egazar’yants S. V., Vinokurov V. A., Vutolkina A. V., et al. Oil sludge treatment processes // Chemistry and Technology of Fuels and Oils. 2015. V. 51(5). Р. 506 – 515. DOI: 10.1007/s10553-015-0632-7
6. Long X., Zhang G., Shen C., et al. Application of rhamnolipid as a novel biodemulsifier for destabilizing waste crude oil // Bioresource Technology. 2013. V. 131. Р. 1 – 5. DOI: 10.1016/j.biortech.2012.12.12
7. Kariminiaae-Hamedaani H.-R., Kanda K., Kato F. Wastewater treatment with bacteria immobilized on to a ceramic carrier in an aerated system // Journal of Bioscience and Bioengineering. 2003. V. 95(2). Р. 128 – 132. DOI: 10.1016/s1389-1723(03)80117-2
8. Al-Amshawee S. K. A., Mohd Yusri Bin Mohd Yunus M. Y. B. M., Alalwan H. A., et al. Experimental investigation of bio?lm carriers of varying shapes, sizes, and materials for wastewater treatment in ?xed bed bio?lm reactor: a qualitative study of biocarrier performance // Journal of Chemical Technology & Biotechnology. 2022. V. 97. Р. 2592 – 2606. DOI: 10.1002/jctb.7131
9. Рябов В. Г., Красновских М. П., Слюсарь Н. Н. и др. Утилизация нефтешламов путем их абсорбции резиновой крошкой // Нефтяное хозяйство. 2024. № 2. С. 120 – 123. DOI: 10.24887/0028-2448-2024-2-120-123
10. Goldstein T. P., Aizenshtat Z. Thermochemical sulfate reduction a review // Journal of Thermal Analysis. 1994. V. 42(1). Р. 241 – 290. DOI: 10.1007/bf02547004
11. Пономарева Г. А., Панкратьев П. В., Хальзов А. А. Микроэлементный состав нефти оренбургских месторождений // Вестник ОГУ. 2012. № 1(137). С. 164 – 171.
12. Chuang H.-C., Hwang W.-S., Liu S.-H. Effects of basicity and FeO content on the softening and melting temperatures of the CaO–SiO2–MgO–Al2O3 slag system // Materials Transactions. No. 200950(6). Р. 1448 – 1456. DOI: 10.2320/matertrans.mra2008372
13. Hribar U., Bonderup ?stergaard M., Iversen N., et al. The mechanism of glass foaming with water glass // Journal of Non-Crystalline Solids. 2023. V. 600, No. 15. Р. 122025.
The article can be purchased
electronic!
PDF format
700 руб
DOI: 10.14489/glc.2025.06.pp.051-057
Article type:
Research Article
Make a request
