-
21.
THE POSSIBILITY OF USING WASTE FROM THE ENRICHMENT OF FERRUGINOUS QUARTZITE KMA IN THE PRODUCTION OF CERAMIC BUILDING MATERIALS
-
(Not-set)
-
The possibility of using waste from the enrichment of ferruginous quartzites of KMA is considered. The chemical composition of waste from Lebedinsky GOK has been investigated. It has been established that ...
-
22.
CERAMIC DIELECTRICS IN THE OXIDE SYSTEM ZrO2–SnO2–TiO2 FOR MICROWAVE TECHNOLOGY
-
(Not-set)
-
In this work, a study was made of the possibility of obtaining ceramics for microwave technology in the system of ZrO2–SnO2–TiO2 oxides by solid-phase synthesis using a sintering additive, lanthanum (III) ...
-
23.
INFLUENCE OF REFRACTORY FILLERS ON THE PROPERTIES OF CERAMICS BASED ON HIGH CONCENTRATED SILICA GLASS SUSPENSIONS
-
(Not-set)
-
Refractory and heat-resistant materials with a coarse-grained and large-porous structure were obtained using silica glass suspensions with mullite, spinel, corundum and quartz fillers. The influence of ...
-
24.
CALCIUM ZIRCONATE: METHODS OF SYNTHESIS AND APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED THEREON – A REVIEW. PART 1: METHODS OF CALCIUM ZIRCONATE SYNTHESIS
-
(Not-set)
-
The publication presents general information about calcium zirconate and the physical/chemical properties of products based thereon. Methods for CaZrO3 production, such as solid-phase synthesis, electric ...
-
25.
FACING BUILDING MATERIAL BASED ON CULLET MODIFIED WITH POTASSIUM HYDROXIDE
-
(Not-set)
-
The technology of facing material based on mechanically activated cullet modified with potassium hydroxides has been developed. The phase composition, macro- and microstructure of the lining material are ...
-
26.
INFLUENCE OF THE ADDITIVE OF EUTECTIC COMPOSITION IN THE Li2O–B2O3 SYSTEM ON THE SINTERING PROCESS AND PROPERTIES OF CERAMICS BASED ON Li2MgTi3O8
-
(Not-set)
-
The influence of the eutectic additive of the Li2O–B2O3 system on the sintering process and dielectric properties of ceramics based on Li2MgTi3O8 has been investigated. It was determined that the introduction ...
-
27.
INFLUENCE OF YAG CERAMIC POWDERS GRINDING CONDITIONS OF ON THE PROPERTIES OF OPTICAL CERAMICS
-
(Not-set)
-
In this study, the changes in the morphology and degree of agglomeration of both precursor powders and ceramic YAG powders under varying grinding conditions was considered. The effect of these parameters ...
-
28.
THE COMBINED EFFECT OF SINTERING ADDITIVES MgO AND TEOS ON THE STRUCTURE AND OPTICAL PROPERTIES OF CERAMICS YAG:Yb, Er
-
(Not-set)
-
In this work, the effect of sintering additives based on magnesium oxide (MgO) and silicon oxide (TEOS) in concentrations from 0.02 to 0.10 wt. % and 0.2 to 0.5 wt. %, respectively, was investigated on ...
-
29.
SYNTHESIS AND STUDY OF THE OPTICAL AND SPECTRAL-LUMINESCENT PROPERTIES OF LuAG:Ce CERAMICS
-
(Not-set)
-
In this study, LuAG:Ce ceramic powders with compositions of Lu2.98Ce0.02Al5O12 and Lu2.93Ce0.07Al5O12 were synthesized using chemical precipitation. Luminescent ceramic samples were then produced from ...
-
30.
INFLUENCE OF TECHNOLOGICAL PARAMETERS OF THE FLOAT PROCESS ON THE ADHESION OF TIN OXIDES TO SHEET GLASS
-
(Not-set)
-
The influence of the operating mode of the float bath on the adhesion of tin oxides to the lower surface of the produced glass ribbon was studied. Statistical analysis of the experimental data and modeling ...
-
31.
THERMODYNAMIC ANALYSIS OF OXIDE-CARBON AND CARBON MONOXIDE CHEMICAL REACTIONS IN ORDER TO SELECT ADDITIVES FOR CARBON NANOTUBE REINFORCED CORUNDUM CERAMICS
-
(Not-set)
-
The calculation of Gibbs energy for reactions of interaction of ZrO2, Al2O3, SiO2, TiO2, CaO and MnO with carbon and carbon monoxide in temperature range 1273 – 2273 К (1000 – 2000 ?С) is made to select ...
-
32.
ENVIRONMENTAL ASPECTS OF THE USE OF BATTLE GLASS FOR THE PRODUCTION OF GLASS CONCRETE
-
(Not-set)
-
The technology of glass concrete based on dispersed container and sheet glass has been developed. It is shown that when Portland cement and cullet are ground together, when a specific surface area of 5890 ...
-
33.
FACING BUILDING MATERIAL BASED ON MECHANICALLY ACTIVATED CULLET MODIFIED WITH SODIUM HYDROXIDE
-
(Not-set)
-
The technology of facing material based on mechanically activated cullet modified with sodium hydroxides has been developed. The phase composition, macro- and microstructure of the lining material are ...
-
34.
THE ROLE OF IRON OXIDES IN THE PRODUCTION OF FLOAT GLASS
-
(Not-set)
-
A statistical analysis of the relationship of the redox ratio of the produced float glass with the technological mode of cooking, the charge content and the chemical composition of the glass was carried ...
-
35.
CERAMIC MATERIALS BASED ON Al2O3 FOR LTCC APPLICATION
-
(Not-set)
-
In the paper presents an overview on the topic of obtaining high-temperature (HTCC) and low-temperature (LTCC) ceramics. The topic observe transition from a high-temperature process of obtaining ceramic ...
-
36.
MODERN TRENDS IN THE DEVELOPMENT OF TECHNOLOGIES FOR MATTING GLASS PRODUCTS
-
(Not-set)
-
Modern trends in the development of technologies for matting glass and glass products are considered. An effective technology of glass matting using alternative energy sources, in particular low-temperature ...
-
37.
PRODUCTION OF GLASS FOAMS ON THE BASIS OF ROCKS
-
(Not-set)
-
The results of research on the production of granular and block foam glass materials based on widespread highly siliceous rocks and technogenic waste are presented. The main attention of researchers is ...
-
38.
RESOURCE- AND ENERGY-SAVING TECHNOLOGY FOR DECORATING GLASS PRODUCTS WITH FOAMING PAINTS
-
(Not-set)
-
An energy-saving technology for decorating glass products with foaming paints has been developed. The optimal parameters of coating firing by the flow of plasma–forming gas – argon are determined. The ...
-
39.
THE POSSIBILITY OF USING VANADIUM WASTE IN THE TECHNOLOGY OF WALL CERAMICS
-
(Not-set)
-
A complex of physico-chemical studies was carried out: X-ray phase analysis, differential thermal analysis, chemical analysis of vanadium production waste. It has been established that these wastes containing ...
-
40.
INFLUENCE OF CARBON NANOSUBSTRUCTURES ON THE PHYSICAL AND EXPLOITATION PROPERTIES IN STRUCTURAL CERAMICS IN THE Al2O3–ZrO2 SYSTEM
-
(Not-set)
-
The influence of the concentration of decorated carbon nanotubes and the influence of the concentration of eutectic additives, as well as the effect of the firing regime on the strength characteristics ...
