-
21.
Physical and Chemical Properties of Oxide Coatings Based on Ruthenium, Titanium and Rare Earth Elements Doped by Carbon Nanomaterials
-
(Not-set)
-
Samples of electrodes with an active layer based on TiO 2 , RuO 2 and oxides of rare earth elements Ce, La, Nd, doped with carbon nanoscale, have been obtained. The morphology of oxide electrodes was ...
-
22.
The Influence of Molarity and Temperature of the Alkaline Activator Solution on the Rheological Properties and Structure Formation of Alkaline Activated Refractory
Materials
-
(Not-set)
-
The effect of molarity (from 3.64 to 1.74 M) of a solution of an alkaline activator (ALA) and temperature (from 10 to 20 ° C) of a mixture of alkali-activated materials (ALA) based on chamotte and metakaolin ...
-
23.
Porosity Structure and Technical Properties of Ceramic Materials Based on Wastes of Nonferrous Metallurgy of Eastern Kazakhstan
-
(Not-set)
-
Clinker materials were obtained from non-ferrous metal waste, where the clay part of the tailings was used as the clay material. gravity of zircon-ilmenite ores (GZI), and feldspar concentrate (PShK) - ...
-
24.
Comparative Characteristic of Physical Properties of Dental Composition Materials of Chemical Hardening
-
(At the enterprises and institutes)
-
The preparation of a composite filling material consisting of an inorganic filler in the form of finely ground glass and a polymer matrix is ??considered. The results of experimental studies on the comparative ...
-
25.
Synthesis, Structure and Properties of One- and Multi-Component Additives for Ceramic Materials Based on Aluminum Oxide (review)
-
(Science for ceramic production)
-
... multicomponent, due to their higher melting temperatures and the impossibility of simultaneously influencing a number of properties of the target material. Due to the synergistic effect, the use of multicomponent ...
-
26.
Obtaining and Properties of Spherical Biomaterials for the TiO2?SiO2/CaO System Using the Sol-Gel Method
-
(Biomaterials)
-
... the sol-gel method from solutions synthesized spherical biomaterials based on Tokem- 200. The framework of the material is represented by TiO 2 -SiO 2 , and the inner part is filled with Ca 2+ oxide ...
-
27.
Thermophysic properties of silicon carbide based composite ceramics materials made by sparkplasma sintering (SPS)
-
(Science for ceramic production)
-
The factors affecting the thermal conductivity of ceramic composite materials based on SiC with additives B 4 C, AlN, Si 3 N 4 , Y 2 O 3 , Al 2 O 3 , HfB 2 , obtained by spark plasma sintering ...
-
28.
Influence of SiO2/Al2O3 ratio on structure, properties and heat resistance of geo-polymer refractory materials
-
(At the enterprises and institutes)
-
A study of the properties of lightweight geopolymer materials (GM) based on refractory technogenic waste of aluminosilicates has been carried out. The effect of the ratio of oxides SiO 2 and Al 2 O ...
-
29.
Surface properties of bio-compatible calcium-silicophosphate glass-ceramic materials and coatings
-
(Biomaterials)
-
The influence of the surface properties of the developed calcium silicophosphate glass-crystalline materials and coatings on their biocompatibility has been determined. The ratio of calcium to phosphorus ...
-
30.
Properties of SiO2-СаO-P2O5-TiO2 based materials obtained by a sol-gel method
-
(Biomaterials)
-
Sol-gel method synthesized thin films based on the SiO 2 -CаO-P 2 O 5 -TiO 2 system ... The properties of the material were investigated by methods of infrared spectroscopy, X-ray phase analysis, ...
-
31.
The influence of woven mineral fillers chemical nature on polymer composite materials properties
-
(At the enterprises and institutes)
-
The physicomechanical (density, tensile and compressive strength), thermophysical (TCLE) and dielectric (dielectric constant) properties of polymer composite materials based on woven fillers of mineral ...
-
32.
Properties of glass-foam material doped with nanosized zirconia
-
(Science for glass production)
-
The effect of small additions of zirconium concentrate with an average particle size of 30 nm on the physical and mechanical properties of foam glass is considered. It was found that the introduction of ...
-
33.
Structural and textural properties of a heat-efficient composite material made from clays with varied mineralogical composition
-
(Science for ceramic production)
-
The introduction of foam glass production waste into clay-containing mixtures contributes to the formation of a strongly porous fragmentary structure in the composite material. The influence of the textural ...
-
34.
Electrophysic properties of ceramic materials made from potassium polytitanate nanopowder doped with iron compounds
-
(Science for ceramic production)
-
The effect of the firing temperature on the phase composition and electrophysical properties of ceramic products obtained on the basis of compacted powders of the product of the interaction of potassium ...
-
35.
Properties of ceramic wall materials with various burnout additives
-
(Science for ceramic production)
-
The results of studying the composition of the masses using various pore-forming components to obtain wall ceramic materials with improved thermal insulation characteristics are presented. Their positive ...
-
36.
Physical and mechanical properties of light-curing composite materials
-
(Biomaterials)
-
Light-curing composite dental materials, consisting of an inorganic filler (glass), a polymer matrix, and a bonding layer, are considered. The requirements for them by modern therapeutic dentistry are ...
-
37.
Properties of commercial silicasol and its modification for alumosilicate materials production
-
(At the enterprises and institutes)
-
The properties of industrial silica sol, such as average particle size and size distribution, are considered. The influence of separation methods (filtration and centrifugal) on the indicated characteristics ...
-
38.
Physico-chemical properties of molding solutions for alumosilicate fibrous materials fabrication
-
(At the enterprises and institutes)
-
The rheological properties and aggregate stability of molding solutions for the production of aluminosilicate fibrous materials are considered. The effect of acetate groups in polyvinyl alcohol on the ...
-
39.
The influence of synthesis conditions on microstructure and properties of composite ceramic material made from nanosized Ce0.1Al0.1Zr0.8O2 powder
-
(Science for ceramic production)
-
A comparative analysis of the features of the microstructure and mechanical properties of composite ceramic materials obtained from a nanosized powder of the composition Ce 0.1 Al 0.1 Zr 0.8 O 2 ...
-
40.
Structure and properties of silicate composite materials based on fused alumina - a niobium production slag
-
(Utilization of waste)
-
The properties of silicate composite materials (SCM) based on electrocorundum, which is a waste product of the electrometallurgical production of niobium, are presented. The scheme of SCM heat treatment ...
