-
1.
Phase Transformations in High-Temperature Fibrous Materials at Influence of Non-Equilibrium Temperature and Light Stream
-
(Glassceramics)
-
Investigations of changes in the phase composition and structure of modern ceramic materials under the action of a high-intensity light flux have been carried out. For the experiment, the technological ...
-
2.
Peculiarities of heat-insulating materials macrostructure based on mullite-corundum composition
-
(At the enterprises and institutes)
-
The features of the macrostructure of rigid heat-insulating materials based on fibers of mullite-corundum composition are considered, the change in the physical and mechanical properties of materials over ...
-
3.
Multifunctional high-temperature coatings for heat-insulating materials
-
(Coatings)
-
The outer surfaces of reusable spacecraft are covered with special heat-shielding materials. These materials also need to be protected from erosion, moisture, etc. with thermal control coatings. At VIAM, ...
-
4.
Physico-chemical properties of molding solutions for alumosilicate fibrous materials fabrication
-
(At the enterprises and institutes)
-
The rheological properties and aggregate stability of molding solutions for the production of aluminosilicate fibrous materials are considered. The effect of acetate groups in polyvinyl alcohol on the ...
-
5.
High-temperature coatings for fiber insulation materials
-
(Coatings)
-
Functional coatings for heat-shielding and heat-insulating materials based on quartz fibers and whiskers are considered.
-
6.
Ceramic coatings for gradient high temperature heat insulating materials
-
(Coatings. Enamels.)
-
Ceramic coatings based on organosilicon polymers have been investigated, and the physical, thermal and mechanical properties of coated and uncoated heat-shielding materials have been analyzed. It was found ...
-
7.
Effect of ceramic coatings on sound absorbing properties of heat-protective materials
-
(Coatings)
-
Ceramic coatings for heat and sound absorbing materials, a technological scheme for the manufacture, application and formation of ceramic coatings have been developed, which makes it possible to obtain ...
-
8.
Heat-proofing material based on the ceramic reinforcing fillers
-
(At the enterprises and institutes)
-
... of obtaining a heat-shielding material with an adjustable volume fraction of a reinforcing filler. Investigations of the thermal conductivity and phase stability of samples of a heat-shielding material ...
-
9.
Ceramic alumina fibers and fiber-based materials
-
(At the enterprises and institutes)
-
The constant increase in the operating temperatures of modern aircraft and gas turbine plants requires an increase in the characteristics of ceramic materials, including heat-shielding and heat-insulating ...
-
10.
Thermoreinforcing coatings for heat-protection materials and quasi-plastic ceramics
-
(Coatings)
-
... composite multifunctional material with a thermo-reinforcing coating has been created, which can be used in heat-insulating, heat-shielding and sound-absorbing structures in aerospace engineering and power ...
-
11.
Calculation method of evaluating heat-protection properties of insulation manufactured from the mineral wool on the base of silicate fiber materials
-
(Thermal insulation)
-
A computational method for assessing the heat-shielding properties of gas-filled mineral wool insulation is considered, taking into account the mechanism of interrelated heat and mass transfer processes ...
-
12.
The use of local raw materials in dimming float glass production
-
(Science for glass production)
-
The experience of the Saratov Institute of Glass on the transition from Tashlinsky sand to local sand of variable chemical composition in the production of light and heat-shielding float glass is considered. ...
-
13.
PROTECTIVE TECHNOLOGICAL COATING BASED ON ZrO2–BaO–B2O3–SiO2 SYSTEM FOR PROTECTION OF HEAT-RESISTANT NICKEL ALLOY WITH SINGLE-CRYSTAL STRUCTURE DURING HEAT TREATMENT
-
(Not-set)
-
The purpose of this work was developing of protective technological coating for protection of heat-resistant nickel alloy with single-crystal structure ZHS30 during high-temperature homogenization. Based ...
-
14.
Glass-ceramic composite protective in-process coatings for intermetallic alloys thermomechanic processing
-
(Coatings)
-
Glass-ceramic composite protective technological coatings have been developed in the systems Na 2 O? B 2 O 3 ? SiO 2 and BaO? Al 2 O3? SiO 2 for deformation under isothermal conditions in air ...
-
15.
High-temperature stress relaxation in mullite ? ZrO2 ceramics
-
(Science for ceramic production)
-
The data obtained in the study of stress relaxation during high-temperature bending of ceramic specimens based on mullite modified with zirconium oxide are presented.
-
16.
Prospects for glassplastics based on polyheterocycles as surface insulation
-
(At the enterprises and institutes)
-
The results of studies on the possibility of using fiberglass plastics based on heterocyclic polymers and silica glass fabrics as heat-shielding materials are presented. Thermal, mechanical, thermophysical, ...
-
17.
Special features of batch preparation and glass melting upon using different kinds of soda in sheet glass production
-
(Science for glass production)
-
The experience of using in a continuous technological process of production of sheet light-heat-shielding, mass-colored float glass "light" and "heavy" soda produced by JSC "Soda" ...
