-
1.
STUDY OF THE STRUCTURAL AND MECHANICAL PROPERTIES OF SAMPLES BASED ON MAGNESIUM OXIDE FORMED IN THE PROCESS OF POLYMERIZATION OF ORGANIC BINDER
-
(Not-set)
-
... in dry form at a temperature of 300 ?C. The obtained results suggest that the increase in the structural and mechanical properties of products based on magnesium oxide will be facilitated by the moistening ...
-
2.
EFFECT OF THE THERMOCHEMICAL STRENGTHENING OF ALUMINOSILICATE GLASS ON THEIR OPTICAL AND MECHANICAL PROPERTIES
-
(Not-set)
-
... to determine the depth of the compressed layer, as well as X-ray fluorescence to evaluate cation exchange. The link between the temperature-time parameters of ion exchange and changes in glass’s structural, ...
-
3.
Structural and technological characteristics of glass melts
-
(Science for glass production)
-
A review of works on the structure of silicate and glass melts is carried out using the provisions of synergetics, cluster and fractal concepts. With this in mind, some features of industrial technological ...
-
4.
RESEARCH OF DOMESTIC BORON CARBIDE POWDERS FOR THE PRODUCTION OF REACTION-BONDED CERAMICS
-
(Not-set)
-
The article discussed the problem of manufacturing boron carbide ceramics with high physical and mechanical characteristics. The problem of choosing raw powders and ceramic manufacturing technology is ...
-
5.
INVESTIGATION OF THE STRUCTURE OF A TRANSPARENT GAHNITE-BASED GLASS-CERAMICS IN THE Na2O–ZnO–MgO–Al2O3–SiO2 SYSTEM BY TRANSMISSION ELECTRON MICROSCOPY
-
(Not-set)
-
It is known that the introduction of small Na2O additives (up to 5 mol. %) into the glass composition of the ZnO–MgO–Al2O3–SiO2 (ZMAS) does not interfere with the production of zinc spinel (ZnAl2O4) based ...
-
6.
SYNTHESIS OF MULLITE-SILICA CERAMICS WITH ENHANCED ELECTROPHYSICAL PROPERTIES
-
(Not-set)
-
Presents the results of the synthesis of mullite-silica ceramics with improved electrophysical characteristics based on natural kaolinite raw materials extracted in the Orenburg region. The main attention ...
-
7.
GLASS FORMATION AND PHASE TRANSFORMATIONS IN THE TeO2–ZnO–MoO3 SYSTEM
-
(Not-set)
-
The glass-forming region in the ternary system TeO2–ZnO–MoO3 was investigated at two melt cooling rates. The achieved molybdenum trioxide content in the glass reached up to 80 mol. % with varying TeO? ...
-
8.
DEVELOPMENT OF COLORED GLASS COMPOSITIONS BASED ON BASALT OF THE OSMONSAY DEPOSIT
-
(Not-set)
-
The purpose of the study was to develop compositions of colored glasses based on basalt from the Osmonsay deposit.
To synthesize glasses, compositions in the basalt–quartz–soda system were studied. Quartz ...
-
9.
INTEGRATED APPROACH TO STUDYING CERAMIC ARTIFACTS IN KYRGYZSTAN
-
(Not-set)
-
The purpose of this article is to apply an integrated research approach for the reconstruction of ceramic production technology in the territory of the Kyrgyz Republic based on the results obtained by ...
-
10.
Using of Qualitatively Improved Expanded Perlite
-
(Not-set)
-
A comparative analysis of the physical and technical properties of existing and proposed perlite thermal insulation products, agricultural components, acoustic fillings, demonstrating a significant improvement ...
-
11.
Plasma-Sprayed Ceramic Coatings Based on Fluoragnesium Apa-tite: Application Technology and Properties
-
(Not-set)
-
The technology of synthesis of fluoromagnesiumapatite powder and technology of coating formation by plasma spraying on its basis are presented. The recommended mode for the formation of a coating based ...
-
12.
Features of percolation analysis for porous ceramics structure
-
(Science for ceramic production)
-
It is shown that taking into account the shape and size ratio of particles using the percolation theory makes it possible to refine the assessment of the properties of ceramic and composite materials, ...
-
13.
Thermodynamic analysis as a method for choosing dopants in silicon carbide ceramics production
-
(Science for ceramic production)
-
Abraham T. Powder Market Update: Nanoceramic Applications Emerge // Am. Cer. Soc. Bull. 2004. V. 83. N 8. P. 23.
Toropov N. A., Barzakovsky V. P., Lapin V. V., Kurtseva N. N. State diagrams of silicate ...
-
14.
The influence of woven mineral fillers chemical nature on polymer composite materials properties
-
(At the enterprises and institutes)
-
The physicomechanical (density, tensile and compressive strength), thermophysical (TCLE) and dielectric (dielectric constant) properties of polymer composite materials based on woven fillers of mineral ...
-
15.
Special features of the deformation characteristics of glass-forming melts
-
(Science for glass production)
-
The main provisions of rheology are stated. The main rheological characteristics during flow and some structural features of silicate glass-forming melts are presented. The features of the change in the ...
-
16.
Control of the properties of molding compounds developed on the base of technical alumina
-
(Science for ceramic production)
-
... It was found that mechanochemical activation in the presence of paraffin makes it possible to achieve a greater effect in the regulation of structural, mechanical and rheological properties. The reasons ...
