-
1.
In memory of V. A. Gorokhovskii
-
(Information)
-
-
2.
STRUCTURE AND ELECTRICAL PROPERTIES OF MULTILAYER CERAMIC MATERIALS BASED ON MODIFIED POTASSIUM POLYTITANATES
-
(Not-set)
-
Some ceramic materials formed by sintering layered green bodies formed the compacted powders of the basic potassium polytitanate and this one modified with Mn compound are produced and investigated. Using ...
-
3.
FACING BUILDING MATERIAL BASED ON CULLET MODIFIED WITH POTASSIUM HYDROXIDE
-
(Not-set)
-
The technology of facing material based on mechanically activated cullet modified with potassium hydroxides has been developed. The phase composition, macro- and microstructure of the lining material are ...
-
4.
STUDY OF THE STRUCTURAL AND MECHANICAL PROPERTIES OF SAMPLES BASED ON MAGNESIUM OXIDE FORMED IN THE PROCESS OF POLYMERIZATION OF ORGANIC BINDER
-
(Not-set)
-
The article presents the results of a study of the influence of humidity, oxygen on the formation of the structure and strength properties of products based on magnesium oxide and organic binder SFPR-054. ...
-
5.
FACING BUILDING MATERIAL BASED ON MECHANICALLY ACTIVATED CULLET MODIFIED WITH SODIUM HYDROXIDE
-
(Not-set)
-
The technology of facing material based on mechanically activated cullet modified with sodium hydroxides has been developed. The phase composition, macro- and microstructure of the lining material are ...
-
6.
Synthesis and electrophysical properties of potassium polytitan-ate based ceramic nanocomposites doped with chromium compounds
-
(Science for ceramic production)
-
The thermal behavior of potassium polytitanate modified in an aqueous solution of CrCl 3 for 4 and 18 h and characterized by varying degrees of uniformity of the distribution of chromium in the particles ...
-
7.
Light-colored ceramic ashlar brick manufacture using iron and steel waste
-
(Utilization of waste)
-
The main regularities of changes in the properties of ceramic samples obtained from compositions based on combinations of loam, refractory clays and metallurgical slag are considered. The phase composition ...
-
8.
Ceramic membranes for photocatalytic purification of water
-
(Science for ceramic production)
-
The structure and photocatalytic properties of ceramic membranes synthesized on the basis of amorphous potassium polytitanate intercalated with nickel ions have been investigated. It is shown that the ...
-
9.
Influence of the technological parameters of float glass manufacturing on the heat resistance
-
(Science for glass production)
-
The article presents the results of studies of the thermal stability of heat-absorbing float glass with a thickness of 4.0 - 12.0 mm. It is shown that heat-absorbing glass has high thermal stability (more ...
-
10.
Unbaked castable refractory phase composition formation at the heating-up service conditions temperature of glassmaking aggregates
-
(Refractories for glass production)
-
Comprehensive studies of the phase composition of refractory concrete compositions, heat-treated in various temperature ranges, including when the glass-melting units are put into operation, have been ...
-
11.
Formation of composite structures in aluminosilicate systems upon introduction of potassium titanates
-
(Science for ceramic production)
-
The regularities of the formation of the structure of composite ceramic materials during reaction firing of raw mixtures, including mixtures of powders of traditional aluminosilicate raw materials (kaolinite) ...
-
12.
Heat insulation material based on the glass cut subjected to mechanochemical activation
-
(Utilization of waste)
-
Methods of recycling mixed glass breakage, which is a part of solid household waste, are analyzed. It is shown that the problem of utilization of this type of waste is still relevant. On the basis of the ...
-
13.
Refinement of the float-glass optical properties
-
(Science for glass production)
-
The analysis of the nature of defects causing optical distortion of glass is carried out. It was found that 70% of optical defects in float glass are associated with the formation of a ribbon in a molten ...
-
14.
Soda ash from nepheline raw materials: starting product for glass industry
-
(Raw materials)
-
The physicochemical and technological properties of soda ash from nepheline raw materials of improved modification and its effect on the processes of charge preparation, silicate-glass formation, as well ...
-
15.
The properties of coatings obtained upon silicate glass processing in the melt of potassium and lead nitrates
-
(Coatings. Enamels.)
-
The effect of the duration of surface treatment of lime-alkali silicate glass in a melt of potassium and lead nitrates at a temperature of 460 ° C on chemical resistance and mechanical strength has been ...
-
16.
Production of float-glass of more than equilibrium thickness
-
(Science for glass production)
-
A new method for the production of glass with a more equilibrium thickness has been developed, the main principle of which is to create a compressive force along the axis of the tape with the help of several ...
-
17.
Production of pyrocerams: a method of complex utilization of the waste of chemical industry
-
(Utilization of waste)
-
A variant of the complex utilization of wastes generated at one of the enterprises of the chemical industry in the production of pyroxene sitalls is considered. The structure and properties of synthesized ...
-
18.
Glasstec-2002 calls for cooperation
-
(Information)
-
-
19.
The effect of protecting gas atmosphere on the reduction potential of the melt tank
-
(Science for glass production)
-
A method is considered, the use of which makes it possible to reduce tin oxides in the low-temperature part of the molten bath, where they are predominantly formed. On the basis of experimental data, a ...
-
20.
Pyroceramics on the basis of pyroshale ash
-
(Science for glass production)
-
The experience of synthesis of pyroxene composition sitalls based on the mineral part formed by pyrogasification of solid fuels, in particular, during the processing of oil shale, is generalized. The structure ...
