-
1.
MAIN TYPES OF DEFECTS OF QUARTZ CERAMIC BLANKS PRODUCED BY THE SLIP CASTING METHOD FROM WATER SLIPS
-
(Not-set)
-
... properties and does not require the use of lubricants for the formation of quartz ceramic products by slip casting method allowed to reduce appearance of technological defects of ceramic blanks to 25 ...
-
2.
Structure features of porcelain articles fabricated by slip casting
-
(Science for ceramic production)
-
The features of the structure of porcelain items, which were molded by the pouring and pouring method of slip casting, have been determined. The possibility of identifying the method of manufacturing products ...
-
3.
Clay-carbide-silica refractories developed on the basis of technogenic materials and manufactured using slip casting
-
(Utilization of waste)
-
The results of studies of changes in the basic physical and technical properties of clay-silicon carbide refractories made on the basis of the breakage of silicon carbide plates by the slip casting method, ...
-
4.
Thermoresistant saggers obtained through slip casting
-
(Science for ceramic production)
-
Heat-resistant capsules containing a granular filler with a particle size of up to 130 ?m from silicon carbide were obtained by slip casting in plaster molds. The silicon carbide content was varied from ...
-
5.
Rheological characteristics of the slips in the production of heat-resistant lithium aluminum silicate ceramics
-
(Raw materials)
-
... LC) on the rheological properties and stability of the ceramic slip used to obtain heat-resistant lithium aluminum silicate ceramics. It was found that the maximum liquefaction of the ceramic suspension ...
-
6.
Properties of bioactive glass-crystal coatings formed by slurry casting on titanium alloys
-
(Biomaterials)
-
Calcium-silicophosphate glass-crystalline coatings on titanium alloys were obtained by slip technology and their properties were investigated. The type and the optimal amount of the suspending additive ...
-
7.
Complex fluxing agent based on natron, liquid glass and oxyethylidenediphosphonic acid for ceramics casting
-
(Raw materials)
-
The effect of a complex thinner based on soda, water glass and oxyethylidene diphosphonic acid on the rheological and casting properties of the Stephan Sсhmidt 13250 clay suspension and on the mechanical ...
-
8.
Mathematical model of ceramic molding by hot casting
-
(Science for ceramic production)
-
The results of mathematical modeling of the process of ceramic molding by hot casting are presented. The calculated data describe changes in the state of aggregation of a thermoplastic slip as it cools ...
-
9.
Ultrasonic control of strain behavior of thermoplastic slips
-
(Science for ceramic production)
-
The effect of ultrasound on the deformation properties of thermoplastic slips has been studied. It is shown that, upon sonication, the change in the plastic strength of casting systems beryllium oxide ...
-
10.
The compensatory mechanism of 3D changes upon ceramic molding by hot casting
-
(Science for ceramic production)
-
It has been shown that when molding ceramics by hot casting, volumetric changes in the slip in the hard-plastic state, amounting to 85% of total shrinkage, can be compensated for by plastic deformation ...
-
11.
Flow properties of slips for production of sanitary ceramics
-
(Science for ceramic production)
-
The effect of a combination of inorganic electrolytes and organic viscosity reducers on the rheological properties of ceramic slips for casting sanitary ceramic products is considered. It has been shown ...
-
12.
DEVELOMENT OF MANUFACTURING TECHNOLOGY OF HIGH-TEMPERATURE CERAMICS BASED ON ZIRCONIUM DIBORIDE BY PRESSURELESS SINTERING
-
(Not-set)
-
This paper presents the results of investigation on obtaining ZrB2-based ceramic by the method of slip casting followed by pressureless sintering. Optimal parameters for forming complex-shaped blanks were ...
-
13.
THE PROCESS OF FORMATION OF CRYSTALLINE PHASES IN HEAT-RESISTANT CORDIERITE-CONTAINING ELECTRICAL MATERIALS
-
(Not-set)
-
The article presents the results of studies of heat-resistant insulating ceramics, as well as a mechanism of cordierite phase formation during single firing of compositions containing polymineral clay ...
-
14.
STUDY OF CHARACTERISTICS OF ADHESIVE PERMANENT JOINTS IN REACTION-SINTERED CERAMIC MATERIALS BASED ON SILICON CARBIDE
-
(Not-set)
-
Laboratory samples of reaction-sintered silicon carbide ceramics with permanent adhesive joints were obtained based on isopropyl alcohol and phenol-formaldehyde resin solutions with different contents ...
-
15.
FABRICATION, MICROSTRUCTURE AND PROPERTIES OF COMPOSITE OPTICAL CERAMICS YSAG:Nd3+/YSAG:Sm3+
-
(Not-set)
-
Nanocrystalline powders of yttrium scandium aluminum garnet (YSAG) doped with neodymium Nd3+ and samarium Sm3+ cations were synthesized by chemical precipitation. Their morphology, phase and granulometric ...
-
16.
EVALUATION OF ARMOR PROPERTIES OF DIAMOND-SILICON CARBIDE CERAMIC MATERIAL FABRICATED BY REACTION SINTERING TECHNOLOGY
-
(Not-set)
-
This study demonstrates the functional advantages of reaction-sintered diamond-silicon carbide (D–SiC) ceramics for armor applications compared to conventional materials including silicon carbide, boron ...
-
17.
PRODUCTION OF POROUS CERAMICS ?-Al2O3–3YSZ WITH ADDITIVE OF ?(?)-Al2O3
-
(Not-set)
-
Porous ?-Al2O3–3YSZ ceramics were fabricated using slip casting, incorporating 15 wt. % submicron Al2O3 powders as sintering additives. These orders were synthesized via solution combustion synthesis using ...
-
18.
CALCIUM ZIRCONATE: METHODS OF SYNTHESIS AND APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED THEREON – A REVIEW. PART 2. APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED ON CALCIUM ZIRCONA
-
(Not-set)
-
The publication presents general information about calcium zirconate and the physical/chemical characteristics of products based thereon. The main fields of application of ceramic and refractory materials ...
-
19.
CALCIUM ZIRCONATE: METHODS OF SYNTHESIS AND APPLICATIONS OF CERAMIC AND REFRACTORY MATERIALS BASED THEREON – A REVIEW. PART 1: METHODS OF CALCIUM ZIRCONATE SYNTHESIS
-
(Not-set)
-
The publication presents general information about calcium zirconate and the physical/chemical properties of products based thereon. Methods for CaZrO3 production, such as solid-phase synthesis, electric ...
-
20.
METHODS OF FORMING COMPLEX PROFILE PRODUCTS FROM HEAT-RESISTANT CERAMIC MATERIALS BASED ON SILICON CARBIDE
-
(Not-set)
-
... hot slip molding under pressure, has been studied. The obtained silicon carbide ceramic materials are characterized by a low density of about 3.04…3.07 g/cm3, a porosity of ? 1 % and a bending strength ...
