-
21.
Nanoscale morphology of synthetic leucoxene processing powdered products
-
(Science for ceramic production)
-
Titanosilicates with the structure of natisite Na 2 TiSiO 5 have been synthesized using titanium-silicon intermediate products formed during processing of leucoxene ores as precursors. Using the method ...
-
22.
Properties of SiO2-СаO-P2O5-TiO2 based materials obtained by a sol-gel method
-
(Biomaterials)
-
Sol-gel method synthesized thin films based on the SiO 2 -CаO-P 2 O 5 -TiO 2 system ... The properties of the material were investigated by methods of infrared spectroscopy, X-ray phase analysis, ...
-
23.
Transport reactions in processing of Keiv deposit kianite concen-trate for corundum production
-
(At the enterprises and institutes)
-
Gas transport reactions are widely used in the chemistry of solids, since the direct interaction of solid phases with each other is difficult. The developed process of enrichment of kyanite concentrate, ...
-
24.
The use of fractal analysis methods in porous glass structure evaluation
-
(Science for glass production)
-
The possibility of using fractal analysis in describing the structure of foam glass is shown, for the quantitative assessment of which, under a fixed effect of various technological factors, it is proposed ...
-
25.
Estimating the applicability of clay raw materials for wall and facing ceramics production
-
(Raw materials)
-
Studied the mineral composition of clay raw materials from 48 deposits of Ukraine, which have industrial application. The influence of the mineral composition of clays on the properties of ceramic materials ...
-
26.
Non-transparent colours based on ED-20 resin water emulsion for glassware decoration
-
(Coatings)
-
The possibility of using aqueous epoxy emulsions as a binder for obtaining paints intended for decorating glass products is shown. The physicochemical properties of epoxy coatings have been studied.
-
27.
Structural and technological characteristics of glass melts
-
(Science for glass production)
-
A review of works on the structure of silicate and glass melts is carried out using the provisions of synergetics, cluster and fractal concepts. With this in mind, some features of industrial technological ...
-
28.
Basalts and granitoid solids as mass constituents for ceramic internal lining tiles
-
(Science for ceramic production)
-
Basalt and granitoid rocks have been investigated as components of raw materials for producing ceramic tiles for interior wall cladding. The combined introduction of granitoids and basalts contributes ...
-
29.
Conditions of melting quartz glass with high purity and structural quality
-
(Science for glass production)
-
Based on the analysis of the conditions for the formation of quartz of various deposits, their structural, physicochemical properties, known technologies for the production of quartz grains, new operations ...
-
30.
Bottom block for glass furnaces: fired articles or concrete?
-
(Refractories for glass production)
-
Comparative studies of the properties of fired fireclay products and products made of low-cement refractory concretes (LCC), fired at different temperatures, and non-fired concretes, used for laying the ...
-
31.
Glass of Bi2O3 - GeO2 system and ransparent glass ceramics based on it
-
(Science for glass production)
-
Glasses of composition (in moles) 2Bi 2 O 3 , 3GeO 2 were obtained. Glasses have different colors and differ in electrical properties. This is due to the different concentration of bismuth ions with ...
-
32.
Influence of the technological parameters of float glass manufacturing on the heat resistance
-
(Science for glass production)
-
The article presents the results of studies of the thermal stability of heat-absorbing float glass with a thickness of 4.0 - 12.0 mm. It is shown that heat-absorbing glass has high thermal stability (more ...
-
33.
The effect of enamel layer thickness on the deficiency of enamel coating
-
(Coatings. Enamels.)
-
The dependence of the rate of steel oxidation under the enamel film at enamel firing temperatures is considered. The size of the critical gas bubble breaking through the enamel film during firing has been ...
-
34.
Increase in the resistance of electrode glass to fluorine-containing media
-
(Science for glass production)
-
The effect of ZrO 2 , P 2 O 5 , and F - -ion on the resistance of electrode glasses to fluorine-containing media has been studied. It was found that the most stable glasses are located in the region ...
-
35.
Physicochemical properties of ceramic masses containing Nizhneuvelskoe clay
-
(Science for ceramic production)
-
The results of studies on the replacement of clay raw materials of the Ukrainian field with Nizhneuvelskaya clay (Russia) in the composition of the ceramic mass are presented. The physicochemical properties ...
-
36.
Production of transparent ceramics. Sinergic approach
-
(Science for ceramic production)
-
A systematic approach from the standpoint of synergetics to the production of high-quality transparent ceramics is considered. At all stages of the production of transparent ceramics, it is necessary to ...
-
37.
Processes of phase-and structure-formation upon self-propagating high-temperature synthesis in the system Al - MgCO3 - SiO2 - C
-
(Science for ceramic production)
-
The processes of phase formation and structure formation in the Al - MgCO 3 - SiO 2 - C system during self-propagating high-temperature synthesis are considered. The dependences of the structure and ...
-
38.
Physicomechanical properties of fibers from volcanic slags and materials on their base
-
(Science for glass production)
-
The physicomechanical properties of mineral fibers made from volcanic slags from two deposits in Armenia have been studied. It is shown that slag fibers can become an alternative to widely used glass fibers. ...
-
39.
Low-melting glass based on lead-borate systems
-
(Science for glass production)
-
The state of the art in the development of low-melting glasses, used, in particular, as fluxes for the production of silicate paints, is analyzed. The results of developments and patent data in this area ...
-
40.
Physicomechanical properties of andesite-dacite fibers and their modifications
-
(Science for glass production)
-
The properties of mineral fibers from andesitodacite, which are erupted volcanic rocks, have been studied. The elastic-strength characteristics of elementary fibers, filaments, as well as microplastics ...
