-
21.
APPLICATION OF ADDITIVE TECHNOLOGIES FOR OBTAINING OF SILICON CARBIDE CERAMIC MATERIALS
-
(Not-set)
-
The types of additive manufacturing and the prospects of their application for the production of articles from ceramic materials are considered. The most popular for obtaining parts of complex configurations ...
-
22.
HIGH-TEMPERATURE LIGHTWEIGHT ALKALINE-ACTIVATED MATERIALS WITH ADDITION OF MULTI-WALLED CARBON NANOTUBES
-
(Not-set)
-
The effect of the concentration (from 18 to 6 %) of an alkaline activator (AA) solution on the viscosity and basic properties of geopolymer composites based on chamotte with additives of foam glass production ...
-
23.
THE EFFECT OF THE ACRYLATE MONOMER ON THE CHARACTERISTICS OF PHOTOPOLYMERIZABLE SUSPENSIONS FOR THE PRODUCTION OF CERAMICS FROM STABILIZED ZrO2
-
(Not-set)
-
The influence of the structure and properties of acrylate monomers on the rheology and polymerization of suspensions containing partially stabilized zirconium dioxide, a dispersant and a photoinitiator ...
-
24.
THE INFLUENCE OF MAGNETITE ON THE RADIO-ABSORBING PROPERTIES OF POROUS GLASS COMPOSITE IN THE HIGH-FREQUENCY REGION
-
(Not-set)
-
The effect of the addition of magnetite in the form of pyrite stubs on the physico-mechanical and radio-absorbing properties of the synthesized glass composite by the method of “cold” foaming is considered. ...
-
25.
Physico-Mechanical and Electrophysical Properties of Porous Glass Composites with Silicon Carbide Additives
-
(Not-set)
-
The influence of silicon carbide (10 & # 8211; 40 & # 37; by mass) on the physical-mechanical and electro-physical characteristics of composites is considered. The effect of the additive on the radio absorption ...
-
26.
Glass Composite Hardening with Multilayer Carbon Nanotubes Aligned with a Constant
Electric Field
-
(Not-set)
-
The effect of the electric field intensity and the percentage of multi-layer carbon nanotubes (MCNTs) on the strength of a composite consisting of unidirectional glass fibers has been studied. The results ...
-
27.
Fly Ash as a Technogenic Raw Material for the Production of Re-fractory and Insulating Ceramic Materials (Review)
-
(Not-set)
-
A review of the literature on the production of fly ash at thermal power plants and the level of its processing in Russia and abroad is presented. The properties of fly ash and its fields of application ...
-
28.
Application of Carbon Fiber Waste for Reinforcement of Alkaline-Activated Blast Furnace Slag Composites
-
(Not-set)
-
The prospects of using recycled carbon fiber extracted from aviation carbon fiber waste for reinforcing composite materials based on blast-furnace slag activated with sodium silicate solution are evaluated. ...
-
29.
Thermal Transformations in Hardening Compositions Based on Hydroxyapatite, Monocalcium Phosphate Monohydrate and Polymeric Binders
-
(Not-set)
-
Hardening composite materials based on calcium phosphates (hydroxyapatite, monocalcium phosphate monohydrate) and polymer binders (polyvinyl alcohol, polyvinyl pyrrolidone) have been obtained. It was found ...
-
30.
Physical and Chemical Properties of Oxide Coatings Based on Ruthenium, Titanium and Rare Earth Elements Doped by Carbon Nanomaterials
-
(Not-set)
-
Samples of electrodes with an active layer based on TiO 2 , RuO 2 and oxides of rare earth elements Ce, La, Nd, doped with carbon nanoscale, have been obtained. The morphology of oxide electrodes was ...
-
31.
The Influence of Molarity and Temperature of the Alkaline Activator Solution on the Rheological Properties and Structure Formation of Alkaline Activated Refractory
Materials
-
(Not-set)
-
The effect of molarity (from 3.64 to 1.74 M) of a solution of an alkaline activator (ALA) and temperature (from 10 to 20 ° C) of a mixture of alkali-activated materials (ALA) based on chamotte and metakaolin ...
-
32.
Comparative Characteristic of Physical Properties of Dental Composition Materials of Chemical Hardening
-
(At the enterprises and institutes)
-
The preparation of a composite filling material consisting of an inorganic filler in the form of finely ground glass and a polymer matrix is ??considered. The results of experimental studies on the comparative ...
-
33.
Composites Based on Zeolitesmodifiedby Cu Nanoparticles
-
(Raw materials)
-
The results of studies of the physical properties of a Cu / zeolite composite based on zeolite raw materials from the Kulikovskoe deposit in the Amur region are presented. To obtain the composite, the ...
-
34.
Investigation of Electrodes Materials Based on the Mixture of Oxides of Rare-Earth Metals, Titanium and Ruthenium
-
(Coatings)
-
Samples of electrodes with an active layer based on TiO 2 , RuO 2 , IrO 2 and oxides of rare earth elements Ce, La, Nd, Pr, Gd and others. Studied their electrochemical behavior. The values ??of the ...
-
35.
Reaction Cured Composite Coatings and Glasses
-
(Coatings)
-
The creation of reaction-cured coatings is a promising direction in the field of protection of metallic and non-metallic structural materials during operation in aviation technology. The main feature of ...
-
36.
Glass plastics - construction materials for the sixth technological paradigm?
-
(Environmental protection)
-
It is shown that the manufacture of large-sized parts from fiberglass using transfer molding technologies allows solving technical problems, the implementation of which is impossible with the help of other ...
-
37.
Study of composite glass-plastic supports stiffening behaviour
-
(At the enterprises and institutes)
-
A study of the stiffness characteristics of fiberglass supports with a taper angle & # 8776; 89 & # 176 ;. A method for determining the modulus of elasticity in tension and compression in the longitudinal ...
-
38.
High-performance techniques of materials processing with novel diamond tools
-
(Materials processing)
-
Examples of the successful application of new types of diamond tools for highly efficient processing of a wide class of materials, such as glass, ceramics, sapphire, semiconductor materials, and various ...
-
39.
Modeling the structure of polymer and plaster molds [38-42]
-
(At the enterprises and institutes)
-
The porous structure of polymer and gypsum molds is analyzed. Models of their structure are proposed on the basis of the model of chaotically located spheres and the theory of percolation. The calculation ...
-
40.
The influence of preliminary binder heating on the quality of glass-composite pultrusion rods
-
(At the enterprises and institutes)
-
A description of a mathematical model based on Darcy's law for determining the pressure in the inlet part of the die in the manufacture of large-size composite rods obtained by pultrusion based on glass ...
