-
1.
Editorial Board
-
...
Moscow, Russia
This email address is being protected from spambots. You need JavaScript enabled to view it.
MEMBER OF THE EDITORIAL BOARD
Stanislav S. Solntsev
...
-
2.
S. S. Solntsev is 85 Years Old
-
(Not-set)
-
-
3.
PROTECTIVE TECHNOLOGICAL COATING BASED ON ZrO2–BaO–B2O3–SiO2 SYSTEM FOR PROTECTION OF HEAT-RESISTANT NICKEL ALLOY WITH SINGLE-CRYSTAL STRUCTURE DURING HEAT TREATMENT
-
(Not-set)
-
The purpose of this work was developing of protective technological coating for protection of heat-resistant nickel alloy with single-crystal structure ZHS30 during high-temperature homogenization. Based ...
-
4.
Study Y2O3–Al2O3–SiO2 System Coating Interaction with Water Vapors and Na2SO4 at Temperatures up to 1450 °C
-
(Not-set)
-
For silicon carbide, when exposed to high temperatures in an oxygen atmosphere, passive and active oxidation processes are characteristic, therefore, materials based on SiC must be protected at temperatures ...
-
5.
Crystallisation in Strontiumalumosilicate Systems: Effect of Modifying Additives on Melting Characteristics and Crystallisation Behaviour
-
(Not-set)
-
The influence of a number of modifying additives: calcium fluoride, zinc oxide and boron oxide, on the melting and crystallization properties of strontium aluminosilicate glasses is considered. The influence ...
-
6.
Mullite Glass Powder Manufacturing with the Use of Alkoxotechnolog
-
(Not-set)
-
The advantages of alkoxy technology as one of the types of the sol-gel method for the synthesis of ceramics and glass ceramics are shown; an overview of the methods for the synthesis of alkoxides and oxides ...
-
7.
Investigation of Different SiC-Whiskers Amount on the Properties of Spark Plasma Sintering Ceramic Composite Material
-
(Not-set)
-
The effect of the content of silicon carbide whiskers and the sintering temperature on the physicomechanical and thermophysical properties of samples of a ceramic composite material (CMC) of the SiC & ...
-
8.
Glass Layer Forming in Ceramic Matrix Composite after Impact of High-Enthalpy Flow
-
(Not-set)
-
The structure of the surface layer of ceramic composite materials (CMC) of the compositions HfB 2 & # 8211; SiC and SiC & # 8211; TiC after exposure to a flow of dissociated air has been investigated. ...
-
9.
Investigation of the Adhesion Strength of Reactive Coatings on VZh171 Alloy by Sclerometry Method
-
(Not-set)
-
Studies of the adhesion strength of an enamel reaction-hardening coating on a heat-resistant nickel alloy VZH171 by the sclerometry method have been carried out. The threshold value of the loads required ...
-
10.
Of B2O3 and P2O5 Additives on Silicate and Glass Formation at Srtontium Aluminosilicate Glass Melting
-
(Not-set)
-
the results of studies on reducing the melting temperature of strontium aluminosilicate glass by introducing boron and phosphorus oxides into the charge are presented, the main physicochemical processes ...
-
11.
Synthesis of Yttrium-Aluminum
Garnet Based on Double Ammonium-Containing Yttrium-Aluminum
Carbonate Compounds
-
(Not-set)
-
The difference in the mechanism of synthesis of yttrium-aluminum garnet Y 3 Al 5 O 12 (YAG) from a mixture of double yttrium and ammonium carbonate NH 4 Y (CO 3 ) 2 & middot; H 2 O with aluminum ...
-
12.
Electrospinning Formation of Zirconia Fibers
-
(Not-set)
-
The possibility of obtaining ceramic fibers of zirconium oxide by electrospinning is considered. The factors influencing the fiber diameter and the presence of tape inclusions have been established. It ...
-
13.
Morphology and Optical Properties of Fluorine and Copper Doped Titanium Dioxide Spatially Ordered Films
-
(Not-set)
-
The results of studying the morphology and optical properties of copper and fluorine-doped ceramic TiO 2 films synthesized using electrolytic and solvothermal methods are presented. It is shown that ...
-
14.
High Temperature Ceramic Composite (SiC/SiCw) Materials
-
(Not-set)
-
The issue of the prospects of using ceramic composite materials in heat-loaded units of advanced aviation technology instead of metallic materials is considered. Research has been carried out on the manufacture ...
-
15.
Cordierite Glass-Ceramic for Radioengineering Products
-
(Science for ceramic production)
-
A porous cordierite glass-ceramic was obtained. The processes of crystallization and sintering are considered, some properties of cordierite glass-ceramics made of magnesium-aluminosilicate glass are determined. ...
-
16.
The Processes of Gelation, Phase Formation and Sintering in the Process of Synthesis by the Sol-Gel Method of Aluminosilicate Glass-Ceramic Modified with Refractory Hafnium and Zirconium Oxides
-
(Glassceramics)
-
The sol-gel method was used to synthesize glass ceramics based on the compositions of the Sr (Ba) - Al 2 O 3 - SiO 2 systems, modified with the addition of zirconium oxides ZrO < sub> 2 and hafnium ...
-
17.
Ceramic Material Composite on the Basis of Silicon Carbide with Eutectic Additives
-
(Science for ceramic production)
-
Composite ceramics of granular silicon carbide, precipitation hardened by eutectic additives of the Al 2 O 3 -MnO-TiO 2 system, have been obtained. The effect of a dispersed eutectic powder in the ...
-
18.
Reaction Cured Composite Coatings and Glasses
-
(Coatings)
-
The creation of reaction-cured coatings is a promising direction in the field of protection of metallic and non-metallic structural materials during operation in aviation technology. The main feature of ...
-
19.
Thermophysic properties of silicon carbide based composite ceramics materials made by sparkplasma sintering (SPS)
-
(Science for ceramic production)
-
The factors affecting the thermal conductivity of ceramic composite materials based on SiC with additives B 4 C, AlN, Si 3 N 4 , Y 2 O 3 , Al 2 O 3 , HfB 2 , obtained by spark plasma sintering ...
-
20.
Study of spark-plasma sintered composite ceramics properties in SiC?ZrB2 system
-
(Science for ceramic production)
-
Experimental samples of ceramic composite materials in the SiC-ZrB 2 system with additions of graphite and aluminum nitride were obtained by the method of spark plasma sintering. The physical and mechanical ...
