-
1.
APPLICATION OF THERMAL PLASMA ENERGY FOR PRODUCING GLASS-CRYSTALLINE MATERIALS
-
(Not-set)
-
The characteristics of glass-ceramic materials obtained using thermal plasma have been studied. The effect of TPP ash on the properties of glass-ceramic materials should be taken into account. Samples ...
-
2.
Comparative analysis of plasma-sprayed bioceramic coatings based on zinc-doped hydroxyapatite and tricalcium phosphate
-
(Biomaterials)
-
The results of X-ray diffraction and infrared analyzes of powders of zinc-substituted hydroxyapatite and tricalcium phosphate are presented, and the technology of plasma spraying of coatings based on them ...
-
3.
Surface properties of bio-compatible calcium-silicophosphate glass-ceramic materials and coatings
-
(Biomaterials)
-
The influence of the surface properties of the developed calcium silicophosphate glass-crystalline materials and coatings on their biocompatibility has been determined. The ratio of calcium to phosphorus ...
-
4.
Aspects of formation of titanium glaze coatings for floor tiles
-
(Coatings)
-
The efficiency of using titanium dioxide as a muffler for obtaining glass-crystalline wear-resistant semi-fritted glaze coatings of floor tiles with the required physicochemical and operational characteristics ...
-
5.
Properties of bioactive glass-crystal coatings formed by slurry casting on titanium alloys
-
(Biomaterials)
-
Calcium-silicophosphate glass-crystalline coatings on titanium alloys were obtained by slip technology and their properties were investigated. The type and the optimal amount of the suspending additive ...
-
6.
Study of biocidal properties of pyroceramic coatings based on R2O - RO - TiO2 - P2O5 - R2O3 - SiO2 glass
-
(Coatings. Enamels.)
-
... microorganisms inoculated into liquid nutrient media. It has been shown that glass-crystalline and glass-composite coatings based on glasses of the Na 2 O - CaO - ZnO - TiO 2 - Al 2 O 3 - P 2 ...
-
7.
Optimization of the fritted component composition in the raw mixture of wear-resistant coatings
-
(Coatings. Enamels.)
-
The expediency of using zirconium-free frits in the production of semi-fritted wear-resistant glass-crystalline coatings has been established, which provides a reduction in the total fuel and energy costs ...
-
8.
Synthesis of refractory glass-ceramic coatings using high-alumina waste
-
(Utilization of waste)
-
The results of synthesis and physicochemical studies of heat-resistant glass-crystalline coatings using high-alumina waste from the metallurgical industry, intended to protect nichrome alloys from high-temperature ...
-
9.
Glass crystal matt coatings in the system Na2O - B2O3 - ZnO - TiО2 - SiО2
-
(Glass-crystal materials)
-
The dependence of the crystallization ability of model glasses under conditions of firing coatings made of them on their thermal prehistory is revealed, and the mechanism for obtaining coatings with different ...
-
10.
Development of hydroxy-apatite-containing glass-ceramic coatings
-
(Coatings)
-
Glass-crystalline compositions based on leucite glass with an increased content of fluids and additions of hydroxyapatite or a mixture of hydroxyapatite with fluorite, intended for the manufacture of coatings ...
-
11.
Glass Layer Forming in Ceramic Matrix Composite after Impact of High-Enthalpy Flow
-
(Not-set)
-
The structure of the surface layer of ceramic composite materials (CMC) of the compositions HfB 2 & # 8211; SiC and SiC & # 8211; TiC after exposure to a flow of dissociated air has been investigated. ...
-
12.
Energy-Saving Glass Ionization Technology
-
(Not-set)
-
An energy-saving technology for irisation of glass products using a high-temperature plasma torch has been developed. The effect of the effluent plasma-forming gas flow on the intensity of glass heating ...
-
13.
Foam Glass Synthesis by a Hydrate Method Based on Various Natural Materials
-
(Not-set)
-
A number of charge compositions have been developed on the basis of quartz sand of the Chalgan deposit, gaize of the Botchinsky deposit, slag of the Artemovskaya TPP and diatomite of the Chernoyarsk deposit. ...
-
14.
Pilot Testing of Heat-Resistant Citall Coating for High-Temperature Corrosion Protection of Nichrome Alloys
-
(Coatings)
-
The results of tests in laboratory and production conditions of the developed heat-resistant sitall coatings for the protection of expensive nichrome alloys based on technogenic raw materials are presented. ...
-
15.
Physico-chemical properties of low-melting phosphate glasses in relation to tin content
-
(Science for glass production)
-
The effect of SnO on the physicochemical properties of low-melting glasses of the Li 2 O-SnO-P 2 O 5 (LSP) system intended for use in compositions for vacuum-tight low-temperature joining of various ...
-
16.
Thermophysic properties of silicon carbide based composite ceramics materials made by sparkplasma sintering (SPS)
-
(Science for ceramic production)
-
The factors affecting the thermal conductivity of ceramic composite materials based on SiC with additives B 4 C, AlN, Si 3 N 4 , Y 2 O 3 , Al 2 O 3 , HfB 2 , obtained by spark plasma sintering ...
-
17.
Tungsten radiopaque bioactive glasses: manufacturing process and properties
-
(Biomaterials)
-
A method for obtaining X-ray contrast bioglass by pyrolysis of organic solutions containing tetraethoxysilane, tributyl phosphate, sodium oleate and calcium oleate in turpentine, as well as tungsten extract ...
-
18.
Study of spark-plasma sintered composite ceramics properties in SiC?ZrB2 system
-
(Science for ceramic production)
-
Experimental samples of ceramic composite materials in the SiC-ZrB 2 system with additions of graphite and aluminum nitride were obtained by the method of spark plasma sintering. The physical and mechanical ...
-
19.
Protection of Nichrome alloys articles from high-temperature cor-rosion (review)
-
(Coatings)
-
The results of the analysis of research in the field of developing compositions and methods of applying high-temperature coatings for the protection of various metals and alloys are presented. The relevance ...
-
20.
Influence of increased boron content on SPS-consolidation and properties of commercial silicon carbide powder
-
(Science for ceramic production)
-
Consolidation of industrial silicon carbide powder was carried out using a spark plasma sintering unit. It has been shown that preliminary mechanical activation is a promising method for introducing a ...
